DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
Back to profile
StarMouse3D
StarMouse3D
Back to profile
Follow
Follow
Like
[Bonus!] Salted Butter Clicker

[Bonus!] Salted Butter Clicker

Henlo beans!! 💖

I have another bonus release!! A butter stick clicker inspired by squishy butter!! There is a small size, and a large size. Both use two clickers inside of them!

butter.png

This is a small bonus release in addition to everything else I have planned this month. The Gacha Machine won our community poll and is still coming this weekend!!

I am also working on a big collection of collectible minis to go along with it. They are taking a bit longer than expected because there are a LOT of tiny friends to print and test, but I am really excited about them.

WHAT'S INCLUDED

  • Butter Clicker STL and 3MF

RECOMMENDED PRINT SETTINGS

  • Layer Height: 0.16
  • Infill: 15 percent
  • Filament: Matte or regular PLA
  • Adaptive Layers recommended for smoother effect
  • These are clickers and should not be resized

CLICKER NOTES

  • Missing the clicker plus attachment piece? It likely did not adhere to the build plate. Try washing your plate with soap and water, increasing bed temperature slightly, adding a brim, and reprinting the affected piece.
  • If your clicker feels wobbly, make sure it is fully seated. You can bend the metal pins inward slightly, or remove them entirely if needed.
  • If the top piece feels loose, avoid using Arachne wall generation, as it can affect tolerances. Use classic instead. Different filaments may also fit differently. Increasing flow slightly can help tighten the fit.
  • Make sure all support and brim material are fully removed before assembly.
  • Clickers should fit snugly. If parts are unusually loose or tight, minor printer calibration adjustments may be needed. You can also adjust the scale by 0.1 percent if necessary.

Filaments I Used:
💖 Little Note: Some of the links I share under filaments are affiliate links. That just means if you decide to grab something through them, I may earn a tiny commission at no extra cost to you. It’s a sweet way to support me and helps me keep creating more cute models for you! Thank you so much for always cheering me on—you truly make this all possible. 🌸

Other Notes:

✨ My designs are not recommended for young children or anyone at risk of choking hazards, as some parts may be small. They are also not food safe, as always with 3D prints.

✨ I make all of my designs from scratch in Blender without the use of AI. I will be recording my process more this summer if I have the time, and making more videos. You can check my channel out here!: https://www.youtube.com/@StarMouse3D

Stay sillyl!!
Mouse 🐭✨

0
0
Follow

Comments