[Bonus Flushies!] Triangle and Wiggle Passthrough
Henlo beans!! 💖
I have another little fidget for you today!! This is a bonus model that is an extra in addition to everything else I have planned for the month!
I am working on testing a few last things so I can release my Gacha machine today too!!
These are Pass-Through Flushies. They work great for getting rid of some of the extra filament waste, and they are surprisingly fun to play with!! I felt like I didn't have a lot of models that can be used to flush filament into and still sell, so I made some of these :)
I made two versions: a simple spiral and a wiggly star-topped spiral.
They print super quickly, use very little filament, and make great scrap-filament projects when you do not feel like starting a huge print.
I have already made a small pile of them from using them as flushies over the past few weeks, and they have been insanely popular with kids!
WHAT'S INCLUDED
- Spiral Pass-Through Flushie STL & 3MF
- Star Pass-Through Flushie STL & 3MF
RECOMMENDED PRINT SETTINGS
- Layer Height: 0.16
- Infill: 15 percent
- Supports: Not needed
- Filament: Matte or regular PLA
- Adaptive Layers recommended for smoother effect
PRINTING NOTES
- These are print-in-place models and require reasonably good printer tolerances. If your tolerances are not dialed in, the moving pieces may fuse together during printing.
- If you experience fusing, you can also move the pieces apart in your slicer and print them separately.
- I intentionally designed these with a slightly tighter fit because I found the extra friction more satisfying to play with. Because of this, they may feel a little snug at first compared to similar fidgets.
- The smaller you scale these models, the tighter the fit will become and the harder they may be to slide through one another.
- The larger you scale these models, the looser the fit will become and the easier they will slide.
- For best results, print at the original scale before experimenting with resizing.
Filaments I Used:
💖 Little Note: Some of the links I share under filaments are affiliate links. That just means if you decide to grab something through them, I may earn a tiny commission at no extra cost to you. It’s a sweet way to support me and helps me keep creating more cute models for you! Thank you so much for always cheering me on—you truly make this all possible. 🌸
Other Notes:
✨ My designs are not recommended for young children or anyone at risk of choking hazards, as some parts may be small. They are also not food safe, as always with 3D prints.
✨ I make all of my designs from scratch in Blender without the use of AI. I will be recording my process more this summer if I have the time, and making more videos. You can check my channel out here!: https://www.youtube.com/@StarMouse3D
Stay silly!!
Mouse 🐭✨