CYBER CLAWS... NOW WITH MINI BOXER GLOVES!!!!!

With fast action and faster assembly thanks to it's well designed print-in-place mechanism.

With 3 pre-sized plates, and a completely scalable design you can print a set for the kids - and even the BIGGEST kids! BUT DON'T POKE AN EYE OUT.

To print this model:

1. Ensure you do not have supports turned on for the mechanism objects.

2. The mechanisms come off the plate stiff, but only take a quick crack to free the joints. To release joints squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a slight twist pressure.
This warms up the internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the blades - use the tab on the blade to pop out supports inside the blade slot.

CYBER CLAWS PRINT IN PLACE MECHANISM

CYBER CLAW jan 16.3mf

MED BOXERCYBER PIN tight on right.stl

LG BOXERCYBER PIN tight on right.stl

SM BOXERCYBER PIN tight on right.stl

THE AMAZING MINI BOXERS - NOW COME WITH THE CYBER CLAW PACK!

This reliable print in place mechanism makes for fast assembly, fast action and print strength! Print them for friends.... or your kids, or your friends kids... and their friends!

BUT WHO WILL BE THE CHAMPION??!!

The all-in-one arms comes off the plate stiff, but only takes a quick crack to free the joints.

FOR BEST PERFORMANCE.

1. Ensure you do not have supports turned on for the mechanism objects. And boxing glove infill should be low ( 5-10% gyroid is great).

2. To release the joints.  Squeeze the opposite corners while wrapped in a cloth to avoid a pinched finger.

3. With all joints free-moving, rapidly move each joint in the mechanisms to work it in, moving back and forth for the full range, and apply a *slight* twist pressure.
This warms up those internal surfaces and cleans up bits that may cause unwanted friction.

4. Before adding the gloves - use a toothpick or fork to pop out a little circular support inside the blade slot.

---

The are three sizes in the project. Print same size plates. Large for adults. Small and medium for kids. If you do need to adjust sizing, you'll need to scale everything - or let me know your measurements and I can make rings that fit better.

I hope you find it as fun as I do! Happy printing!

We're always tweaking our models and appreciate you feedback!


MINI BOXER "GLOVES OF GLORY" PRINT IN PLACE

3A boxer pip SMALL parts dec 19.stl

1A boxer pip LARGE parts dec 19.stl

2A boxer pip MEDIUM parts dec 19.stl

CYBER CLAWS MINI BOXER jan 26.3mf

LG Cyber Knives jan 26.stl

MED Cyber Knives jan 26.stl

SM Cyber Knives jan 26.stl

The Groovy is our flexy, hands-free phone stand with a strong grip, easy angle adjustment, and it's so light you'll forget to take it off!


We print this model in PLA, PETG and ABS. But suggest using a High Temp filament for best results, as the sun and HEAT can cause basic PLA to lose springiness in time.


The support settings we include are tested to work across all filaments - but can be fine tuned on your printer. Supported areas of your print may need a little clean up, use a nail file to remove debris and sand smooth to the touch.

Let us know what you think of the model! AND Thanks for supporting makers :D

Spool up, Spooligans!

A GROOVY PHONE STAND

groovy thin case jan 10.stl

The Infinite Knot is our speediest and most satisfying marble looper yet! And ANYONE can make it whirl!

Now in 16mm (standard marble) 12mm, and MICRO LOOPER size! The cutest loopers yet use a 6mm ball bearing and print in under 40 minutes.

TO SIZE TRACK TO YOUR MARBLES:

1. PRINT TEST PIECE !!! (in project & stl) before the full model. For a 16mm marble, print the 16mm test piece. New filament? New test piece.

2. YOUR MARBLE should easily click into the top of the test track, then FALL FREELY through the marble path! Watch your toes.

3. If test is tight (marble stuck!) or too loose (no snap in) - scale the test piece UP OR DOWN BY 1-2% until you're happy. Matching the re-scale WITH FULL MODEL for final print!

HOW DO YOU START IT? Make fast circular motion as seen in gif above, varying speed until it just keeps on going!

IF you can, find a steel ball bearing of same size, which roll the fastest and smoothest with a nice sound.

The Infinite Knot - and many more fun fidgets on our profile!!!

Happy printing, Spooligans!

THE INFINITE KNOT MARBLE LOOPER

MINI MARBLE RUN INFINITE KNOT jan17.3mf

MARBLE RUN INFINITE KNOT 4.5mm print test first jan17.stl

MARBLE RUN INFINITE KNOT 12mm print test first jan17.stl

MARBLE RUN INFINITE KNOT 6mm print test first jan17.stl

MARBLE RUN INFINITE KNOT 16mm print test first jan17.stl

The BB cyclone is here! AND SO are the Days of our Lives...

With a flick of the wrist, send a cascade of BB's into a suspended orbit and watch them slowly descend through the double wormhole.

The cyclone itself is a PET G print, with only a single wall, yet miraculously prints with a single tree support. It's brittle, so take care creasing, then bending the brim off, rather than tugging.

The frame strengthens and protects the cyclone and adds a distinctive timeless design with it's curvaceous spindles.

Instructions:

1. Print cyclone with glass / transparent PET G at 30-40mm/s MAX speed.
2. Fill bottom tray so that only the grooves are full of BB's, too many and it won't spin up.
3. Install 4 posts into bottom, then carefully line up the top, slowly work the joints down and carefully align top of hourglass to insert correctly before final tightening. Some filaments may need glue if posts are loose.

If you have little people or pets, definitely glue this model to secure the bb's!

If you liked this open price print, please share it!!!  AND Check out our VERY popular BB and Marble fidgets!!!!

Happy printing, spooligans!

FIDGETY DAYS OF OUR LIVES BB CYCLONE

LG BB cyclone.stl

SPOOLIGANS GREATEST HITS

Welcome Spooligans! Subscribe to our basic plan for access to print up to FOUR Spooligan Labs printables per month, for personal use.

To have Spooligan Labs toys featured in your store, please see the Makers plan!

This plan is subject to change without notice.

Spooligan's Basic

This plan is being phased out, check out Spooligan basic!

The Spooliganian!

boxer champ belt.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships