Full collection of the Toploader Magic The Gathering card boxes - 50/100/150/200/300/450

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Sizes:
50 Cards - 88mm x 94mm x 115mm
100 Cards - 166mm x 94mm x 115mm
150 Cards - 244mm x 94mm x 115mm
200 Cards - 166mm x 178mm x 115mm
300 Cards - 244mm x 178mm x 115mm
450 Cards - 244mm x 262mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

300 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 300 Cards - 244mm x 178mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 300 Cards

Deck box V2 - 300 - Magic - Topload.stl

200 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 200 Cards - 166mm x 178mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 200 Cards

Deck box V2 - 200 - Magic - Topload.stl

150 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 150 Cards - 244mm x 94mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 150 Cards

Deck box V2 - 150 - Magic - Topload.stl

100 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 100 Cards - 166mm x 94mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 100 Cards

Deck box V2 - 100 - Magic - Topload.stl

50 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 50 Cards - 88mm x 94mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 50 Cards

Deck box V2 - 50 - Magic - Topload.stl

450 Card Deck Box - Magic The Gathering - (102mmx78mm) Topload.

Version 2 is here with click on lid and slotted divider design, store your cards with piece of mind that they wont get damaged!

Card boxes I have always found expansive and never suited to the need of mass storage with out it being a cardboard box. Protect your cards in a ridged box.
Really easy to print, best to have a PEI textured surface with glue.
Suggested Filament: PLA+ (DO NOT USE SILK)
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: However you please but I use 25% progressive halved every 10mm (max 5 times)
Shell: 3 layers on wall, 4 on top and bottom with one wall for roofing
Speed: 150mm, 50% on bottom and top layers
Cooling: yes
Supports: Not required
Max angles: 45 Degrees

Size: 450 Cards - 244mm x 262mm x 115mm

Not for commercial use and only personal printing.
Follow for future updates and new designs.

Magic The Gathering Card Box V2 - Toploader - 450 Cards

Deck box V2 - 450 - Magic - Topload.stl

Magic Card Boxes V2 - Toploader Collection

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

PrintedLayersAus