A collection of dinosaurs, sculpted by Jon-Michael_3D

This is an educational toy, a sculpt of the herbivorous Early Cretaceous dinosaur, Gastonia. It needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 

Filament used in photo- PolyTerra Gradient PLA in the shade Fall

Gastonia

Gastonia Painted.3mf

This is an educational toy, a figure of the Brachiosaurus. Needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 
Filament used in photo- Panchroma Matte Electric Indigo PLA

 
Here is a cool resource we found for teachers from the American Museum of Natural History- https://www.amnh.org/learn-teach/curriculum-collections/dinosaurs-activities-and-lesson-plans

Brachiosaurus

Brachiosaurus Plated.stl

A generic nest with eggs to go along with our dinosaur collection which you can find here- [https://thangs.com/mythangs/collections/103699](https://thangs.com/mythangs/collections/103699)


Two models available- 

One with eggs separate from the nest and split in the middle for printing, you will need glue to assemble them. 
One with the eggs combined with the nest, and pre-painted for multicolor printing.
 

Please be mindful to always monitor children with 3D prints for safety.  

Filaments used in photo- Polylite Brown PLA and Panchroma Cotton White PLA, Polylite Rainbow in Fall for the Gastonia figure.

Dinosaur Nest

dino-nest-plated.3mf

This is an educational toy, a figure of the Triceratops. Needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 

Filament used in photo- Polylite Hedgehog Makes Galaxy Red PLA

Here is a cool resource we found for teachers from the American Museum of Natural History- https://www.amnh.org/learn-teach/curriculum-collections/dinosaurs-activities-and-lesson-plans

Triceratops

Triceratops Plated.3mf

This is an educational toy, a figure of the Ankylosaurus. Needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 

Filament used in photo- Polylite Jungle Green PLA

Here is a cool resource we found for teachers from the American Museum of Natural History- https://www.amnh.org/learn-teach/curriculum-collections/dinosaurs-activities-and-lesson-plans

Ankylosaurus

Ankylosaurus Plated.3mf

This is an educational toy, a sculpt of the late Jurassic armored dinosaur- Stegosaurus. It needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 

Filament used in photo- Polylite PLA in Orange

Here is a cool resource we found for teachers from the American Museum of Natural History- https://www.amnh.org/learn-teach/curriculum-collections/dinosaurs-activities-and-lesson-plans

Stegosaurus

Stegosaurus.stl

This is an educational toy, a figure of the Parasaurolophus. Needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. The painted 3mf version is available. 

Filament used in photo- Panchroma Matte Army Blue

Parasaurolophus

Parasaurolophus Painted.3mf

Here is our first dino to go along with our volcano found here- https://than.gs/m/1284219

We used auto organic/tree supports with an overhang threshold of 25 degrees with great success. 

Filament color used in photo- Polymaker Flat Dark Earth PLA

Tyrannosaurus Rex

trex plated.3mf

Volcano Design to go with the classic classroom chemistry experiment- the inside is slightly larger than the opening to give slight resistance to the foam escaping. the sides are sculpted to have three deep lava “flows” for a cool visual effect. 

We tested ours and rinsed it clean with warm soapy water without issue.

Prints in one piece, no supports necessary. 

Filament color used in photo- Panchroma Starlight Jupiter PLA

Volcano

Volcano.3mf

This is an educational toy, a sculpt of the Late Jurassic dinosaur Diplodocus. It needs full support, we used tree/organic type on Auto Support with a 25 degree overhang threshold with great success. 

Filament used in photo- Panchroma Starlight PLA in Mars

Diplodocus

Diplodocus Plated.3mf

This is an educational toy, a sculpt of the Late Cretaceous dinosaur, Tylosaurus.

We are including two versions- 
Plated- it is pre split with a dowl for attachment, it will require glue, we found a more voluminous glue is best (like a gel type, avoid thin watery glues).
The original non-split version- so if you would like to print it in one part with full support or split the item yourself, you are welcome to. 
For the Pre-Split/Plated version, we supported the tail and under the “arm pits”. 

Filament used in photo- Panchroma Starlight PLA in Starlight Comet and Panchroma Matte PLA in Mint.

Tylosaurus

Tylosaurus Plated.3mf

A sculpt of a theropod of the Late Cretaceous dinosaur, Carnotaurus.
It does need full support- we printed it with auto supports (organic/tree type) with a 25 degree threshold with great success. 

Filament colors used in photo- Panchroma Matte Earth Brown PLA and Panchroma Matte Muted White PLA

Carnotaurus

Carnotaurus Plated.3mf

A sculpt of of the Late Cretaceous dinosaur, Pachycephalosaurus.

It does need full support- we printed it with auto supports (organic/tree type) with a 25 degree threshold with great success. 

Filament colors used in photo- Panchroma Matte Pastel Watermelon in PLA

Pachycephalosaurus

Pachycephalosaurus Painted.3mf

A sculpt of the extinct animal from the Middle Jurassic, Liopleurodon.

This is a whole sculpt, you can split it in the slicer for easier printing and glue it afterward or print it whole with full support. 

 

Filament used in photo- Panchroma Starlight Twilight PLA

Liopleurodon

Liopleurodon.stl

A sculpt of of the Early Cretaceous dinosaur, Baryonyx.

It does need full support- we printed it with auto supports (organic/tree type) with a 25 degree threshold with great success. Add an outer brim if needed for extra adhesion.

Filament colors used in photo- Panchroma Galaxy Dark Grey PLA

Baryonyx

Baryonyx Plated.3mf

Dinosaurs

Magnetic Alphabet (Upper-case and Lower-case)

A.stl

Chess Set

Chess Board Plated.3mf

Handwriting Helper Stencil

Handwriting Helper Letters.stl

Plant Cell Model w/ Labels

Plant Cell V2 Painted.3mf

Using the power of 3D printing to create magical fun and educational toys that help kids learn and grow.

Polymaker Education

Achievements

Fan Favorite

Sequoia