This design can be used as a vase or pencil holder. The faces included are of my Hannya, Oni, Foo Lion and Orochi models.

Features:

Includes tray for water drainage.
Painted 3MF file for Bambu Lab.
Stands required; tree stands recommended.

Important Note:
This digital file is intended for personal use only. By downloading it, you acquire the right to print and enjoy this design in your home. You are not allowed to sell or distribute the digital file or the resulting printed models.

Join my Patreon or my Tribe and get access to:

Welcome pack with over 30 models, including subscriber exclusive models, new releases and a BONUS with previously released models.
50% discount codes on previous models, valid at Cults3D.
PipeCox commercial license and authorized PipeCox seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D printing parameters

Layer: 0.16 mm or 0.2 mm
Support: SI "in tree
Filling: 10

Yokai Blend Vase

Yokai_Blend_Vase_PipeCox.stl

Fidget Toy, includes storage box which also serves to hang them on the wall.

They do not need supports, I recommend using Raft for better adhesion to the printing plate.
Works well with PLA from 70% scale.

The download also includes 3MF file for bambu lab, which is configured to be printed with VARIABLE LAYER HEIGHT.

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.
Join my Patreon and my Tribe and you will have access to:

- Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
- Codes with a 50% discount on previous models, valid for cultos3D.
- PipeCox authorized seller badge to sell physical copies.

Patreon:
https://www.patreon.com/pipecox

Tribe:
https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D printing parameters

PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: Variable from 0.08 mm to 0.2 mm
Support: No
Filling 10%.
Raft: Recommended 3 layers 

Pixel Cat

Pixel_Cat_PipeCox.stl

2 “Pixels” anti-stress toys:

- PIXEL CUBE Rounded edges
- PIXEL RECTANGLE Rounded edges

Includes storage box which also serves to hang them on the wall. Ideal to have them on the desk at work.
It is important to note that this digital file is for personal use only. By downloading it, you acquire the right to print and enjoy this design in the comfort of your home. However, you are not allowed to sell or distribute the digital file or the resulting printed models.

Join my Patreon or my Tribe and you will have access to:

- Welcome Pack with over 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
- Codes with a 50% discount on previous models, valid for cultos3D.
- Commercial License, PipeCox authorized seller badge to sell physical copies.

Patreon:
https://www.patreon.com/pipecox

Tribe:
https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D printing parameters

They don't need supports, but I recommend using Raft with three layers for better adhesion to the printing plate.
Works well with PLA from 70% scale and up.
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.2mm
Support: No
Filling 10%.
Brim or Raft: Recommended. 

Pixels Rounded Edges

PIXEL_Rectangle_Rounded_Edges_PipeCox.stl

Articulated wall mask, Robotic cat with skull inside.

Includes two options, print in place and separate pieces.
Easy to print (no backing)

Available in Stl and 3mf painted files for Bambu Lab

It is important to note that this digital file is intended for personal use only. By downloading it, you acquire the right to print and enjoy this design in the comfort of your own home. However, you are not allowed to sell or distribute the digital file or the resulting printed models.

Join my Patreon or my Tribe and you will have access to:

- Welcome Pack with over 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
- Codes with a 50% discount on previous models, valid for cultos3D.
- Commercial License, PipeCox authorized seller badge to sell physical copies.

Patreon:
https://www.patreon.com/pipecox

Tribe:
https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D printing parameters

PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.16 mm or 0.2 mm
Support: on the ears if printing in separate pieces.
Filling 15%. 

Cat Bot

CAT_BOT_Print In Place_PipeCox.stl

Vase or pencil holder of rotating faces.
Includes tray for water drainage and 3mf painted file for Bambu Lab

No brackets required

It is important to note that this digital file is intended for personal use only. By downloading it, you acquire the right to print and enjoy this design in the comfort of your own home. However, you are not allowed to sell or distribute the digital file or the resulting printed models.

Join my Patreon or my Tribe and you will have access to:

- Welcome Pack with over 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
- Codes with a 50% discount on previous models, valid for cultos3D.
- Commercial License, PipeCox authorized seller badge to sell physical copies.

Patreon:
https://www.patreon.com/pipecox

Tribe:
https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D printing parameters

PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.16 mm or 0.2 mm
Support: No
Filling 10%. 

Multi Face Vase

Multi_Face_VASE_PipeCox.stl

PIXEL CUBE
PIXEL RECTANGLE

Includes storage box which can also be hung on the wall. Ideal to keep them on your desk at work.

It is important to note that this digital file is for personal use only. By downloading it, you acquire the right to print and enjoy this design in the comfort of your home. However, you are not allowed to sell or distribute the digital file or the resulting printed models.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with over 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-Commercial License, PipeCox authorized seller badge to sell physical copies.

Patreon:
https://www.patreon.com/pipecox

Tribe:
https://www.myminifactory.com/es/users/PipeCox?show=tribe

Check out my other Skull Girl PIXELS on Cults3d:

https://cults3d.com/en/3d-model/game/pixels_skull-girl
3D printing parameters

They don't need supports, but I recommend using Raft or Brim for better adhesion to the printing plate.
Works well with PLA from 70% scale and up.

PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.2mm
Support: No
Filling 10%.
Brim or Raft: Recommended. 

Pixel Cube Rectangle  

PIXEL_RECTANGLE_ PipeCox.stl

3 "Pixels" anti-stress toys :

Pixel_Skull Girl

Pixel_Girl

Pixel_Skull

Includes box for storage which also serves for wall hanging.

Ideal for keeping them on your desk at work.

They don't need supports, but I recommend using Raft or Brim for better adhesion to the printing plate.

Works well with PLA at 70% scale and above.

The download also includes 3MF files for bambu lab, which are set to be printed with VARIABLE LAYER HEIGHT, to save time and get a better finish on faces.

**For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with 50% discount on previous models, valid for cultos3D.
-PipeCox authorized reseller badge to sell physical copies.


3D PRINTING SETTINGS
3D PRINTING

PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Coating: Variable from 0.08 mm to 0.2 mm
Support: No.
Filling 10%.
Brim or Raft: Recommended. 

Pixel Skull Girl

Pixel_Skull_PipeCox.stl

Articulated wall mask, Hannya Honnari from Japanese legends.

The meaning of the Hannya mask is twofold. It is a paradox because it is both a symbol of revenge and destruction, but for Japanese society a hannya mask is also a talisman of protection against evil spirits....

Includes two options, print on site and separate pieces.

Easy to print (no backing)

Available in Stl and 3mf files painted for Bambu Lab

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or mu Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

Check out my painting process:

Hand painting process

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4mm.
Layer: 0.12mm
Filling 10 %.
Support: Not required
Raft or Brim: recommended 

Honnari Hannya

Honnari_Hannya_Print_In_Place_PipeCox.stl

Wall mask, Oni Demon of Japanese legends.

The meaning of the hannya mask is twofold. It is a paradox because it is both a symbol of revenge and destruction, but for the Japanese society a hannya mask is also a talisman of protection against evil spirits...

Easy to Print (no media)

Download includes Stl and 3mf painted files for Bambu Lab

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

See my painting process:

Hand painting process


3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4mm.
Layer: 0.12mm
Filling 10 %.
Support: Not required
Raft or Brim: recommended 

Honnari Wall Mask 

Honnari_PipeCox.stl

Decorative figure for Valentine's Day.

Fused heart with negative sculpted faces of a couple in love.

Easy to print, no supports needed.

Download includes Stl and 3mf files painted for bambu lab printers.

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm
Layer height: 0.2mm.
Filling 10 %.
Support: No
Raft or Brim: Recommended 

Loud Love

Loud_Love_PipeCox.stl

These two cigarettes for decorating, no supports needed, works great in PLA.

The download includes Stl and 3mf painted files.

Easy to print
For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: recommended 0.1mm or 0.2mm.
Filling 10 %.
Support: No
Raft or Brim: Recommended 

Rollo Haze & Hachis skunk 

Rollo_Haze_PipeCox.stl

Articulated mural mask

Inti is the Sun God, the most significant deity of Inca mythology and mythological ancestor of the founders and rulers of the Inca Empire.

The download includes Stl and 3mf painted files.

Includes two options, print on site and separate pieces.

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4mm.
Layer: 0.05mm or 0.1mm.
Filling 10%.
Support: Only parts "INTI_side 1_PipeCox" and "INTI_side 2_PipeCox".
Raft or Brim: recommended 

INTI

INTI_print in place_PipeCox.stl



Wall hanging android head, very easy to print.
(No brackets needed)

Download includes STL and 3MF multicolor files (3 Colors)

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4mm.
Layer: 0.05mm or 0.1mm.
Filling 10 %.
Support: no
Raft: recommended


Omega Wall 

Omega_Wall Mask_PipeCox.stl

OMEGA is an articulated Robot that is printed in a few pieces to assemble, its joints allow it to pose in many ways.

It includes two weapons that can be used to replace his hands.

RECOMMENDATIONS:

- Use PLA+ filaments or strong filaments.
- Use supports only for the joints.
- Do not use supports on: hands, feet and weapons.

Available in STL and 3MF painted formats!

I have mixed PLA+ and silk PLA filaments for the 100% scale printed Omega droid, the PLA+ I have used is the black color and I have used it on the joints to give it more firmness.

You can apply a coat of nail polish to the joints if they wear out with use or if you print larger scale, this helps the joints to be firmer.

I have used PLA+ for 200% scale printing and it has worked very well.

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
Material: PLA+
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.1 mm
Filling 15 %.
Support: Yes, in

Omega Droid

Omega Droid_PipeCox.3mf

Hannya mask version usable in STL and 3MF multicolor formats.

The download includes three options to be able to print, a full version, a half face version and a separate one in pieces that can be joined using glue and reinforced with small strings, also the piece that covers the mouth and nose, has holes to use it independently.

The 100% scale model is suitable for a 165 mm wide head, it can be scaled to fit the required size.

In the pictures it is printed in 85%, 95% and 100% scale.

Supports are needed, I recommend using tree supports.

Works well in PLA with 0.2" layer height.

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
Material: PLA+
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.2 mm
Filling 15 %.
Support: Yes, on tree
Raft: recommended 

Hannya Mask

Hannya_Mask_PipeCox.stl

Articulated mask that can be opened and closed, it has straps to hold it and adjust it to the head and a piece on each side that allows the mask to be left open when in use.

The 100% scale STL model is suitable for a 160 mm wide head, it can be scaled to fit the required size.

For printing, just use brackets on the straps to hold the mask, the Mask does not need brackets.

Works well in PLA with 0.2" layer height.

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.2 mm
Filling 15 %.
Support: only on belts
Raft: recommended

Droid Mask

Droidmask_Face_PipeCox.stl

Easy to print wall mask, no supports needed.

The Catrina is an iconic figure associated with the Day of the Dead, a traditional Mexican holiday honoring the deceased. Although it is a skeletal figure, the Catrina is generally depicted in a festive and joyful manner rather than being frightening.

The Catrina is an important symbol of Mexico's rich tradition and cultural connection to death, which is celebrated in a festive and respectful manner during the Day of the Dead.
The download includes two versions; a Print.in.Place piece and another version in separate pieces for easy painting or using different colors of filaments.

Test at 50% and 100% to see how well
work very well in PLA.
For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4mm.
Layer: 0.05mm or 0.1mm.
Filling 10 %.
Support 

Catrina

Catrina_Print_In_Place_PipeCox.stl

Chinese New Year 2023 is the year of the Water Rabbit, according to the Chinese horoscope, one of the most peaceful and hopeful animals.

The Water Rabbit wall hanging can be used to decorate or hook necklaces, bracelets, etc...

(No brackets needed)

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Bed: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.1mm
Filling 10 %.
Support: No
Raft: Recommended 

Water Rabbit

Water Rabbit_wall.stl

Easy to print articulated model (No brackets needed).

The download includes Worox in one piece, the Rock and the version with detachable glue for larger scale printing.

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
In the photos it is printed at 150% scale, I have also tested at 80% and 100% without problems.
PLA
Nozzle temperature: 210°.
Bed temperature: 50°.
Nozzle diameter 0.4 mm.
Layer: 0.1mm
Filling 20 %.
Support: No
Raft: Recommended 

Worox Articulated

WOROX_One_piece.stl

Worox the guardian of the home

Wall keychain very easy to print, it has 3 holes to fix it on the wall and use it as a keychain.
(No brackets needed)

For personal use only

By downloading my models you have no right to sell any digital file or printed model of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
Material: PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4mm.
Layer: 0.05mm or 0.1mm.
Filling 10 %.
Support: no
Raft: recommended 

Worox Wall 

WOROX_WALL KEY CHAIN.stl

A legendary cryptid, described as a being that attacks animals of different species in livestock or rural areas.

Three pieces, no glue or additional materials needed.

**For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with 50% discount on previous models, valid for cultos3D.
-PipeCox authorized reseller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter: 0.4mm.
Layer: 0.1mm
-Front piece:
15% fill.
Support: use customized supports for stability
Plate adhesion: Raft 8.0mm of extra margin
-Back piece:
15% fill.
Backing: no
Plate adhesion: Raft 8.0mm of additional margin
-Legs:
Filler 20 %.
Backing: no
Plate adhesion: Raft 5.0mm of additional margin. 

Chupacabras

Chupacabras_Front.stl

Wall pot, easy to print does not need any support, Ideal for small plants such as cacti or succulents, has drainage for water.

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.05mm or 0.1mm
Filling 10%.
Support: No
Raft: recommended 

Luna Wall

LUNA_Wall planter.stl

According to legend, this creature seeks out children who have misbehaved or lack Christmas spirit and carries them away in his sack to the underworld, where they will be punished eternally.

Wall decoration

Easy to print, no media required

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.05mm or 0.1mm.
Filling 10 %.
Support: No
Raft: No 

Krampus

Krampus_Wall.stl

Halloween Wall Decoration

Easy to print, no backing needed

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

-Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:
-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.05mm or 0.1mm.
Filling 10 %.
Support: No
Raft: No 

Pumpkin Girl

Pumpkin Girl_Wall.stl

Very easy to print, it has 3 holes to fix it on the wall and use it as a keychain.

Foo lions are considered a symbol of protection against evil spirits (demons), bad energies and bad people. For this reason they used to decorate palaces, buildings and homes with figures of these creatures that always come in pairs formed by a male and a female.

For personal use only

By downloading my models you have no right to sell any digital file or printed model of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter: 0.4 mm.
Layer: 0.1mm
Filling 10 %.
Support: No
Raft: No 

Lion Foo Wall 

Foo_Lion_wall.stl

It includes two alternatives of heads, one can be used as a flowerpot and the other as an ornament to keep small things. Also two necklace alternatives, with spikes and with bones.

Both models only require supports for the ears.

I have used Petg and PLA material for testing and have not had any problems.

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.1mm or 0.2mm.
Filling 10%.
Support: for ears only
Raft: recommended

English Bulldog 

BullDog_Head 2.stl

Decorative seed easy to print, no supports needed

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter: 0.4 mm.
Layer: 0.1mm or 0.05mm.
Filling 10 %.
Support: no
Plate adhesion: Recommended, Balsa 3.0mm additional margin. 

Seed Vicious

Seed_Vicious.stl


Mapuche aborigine with a wide smile, which when lifted activates the surprise mechanism.

Three pieces, no glue or additional materials needed.

Traditional figure of Chilean handicrafts, being used mainly for jokes and pranks, as well as an ornament.

Join my Patreon or my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with 50% discount on previous models, valid for cult3D.
-PipeCox authorized reseller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter 0.4mm.
Layer: 0.1mm or 0.05mm.
-Front piece:
15% filler.
Support: no
Plate adhesion: Raft 8.0mm of additional margin
-Rear piece:
Filler 10 %.
Bracket: use custom brackets for added stability
Plate adhesion: Raft 8.0mm of additional margin
-Legs:
Filler 20 %.
Support: no
Plate adhesion: Raft 5.0mm additional margin.


Indio Pícaro

Indio_Picaro_front.stl

Wall hanging ornaments
Includes two models with and without helmet
Easy to print, no support needed.

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter: 0.4 mm.
Layer: 0.1mm or 0.05mm.
Filling 10 %.
Support: no
Raft and rim: no 

Orochi

02-Orochi.stl

Includes 2 Decorative Busts of horses:
- Wild Horse
- Tamed Horse

*Scale to desired size

painting process

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.
Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.1mm
Filling 10 %.
Support: Yes (on tree and customized supports).
Raft and rim: Yes. 

Wild and Tamed

Tamed_Horse.stl

Decorate your home in the year of the tiger with this very easy to print wall keychain, it features 3 holes so you can attach it to the wall and use it as a keychain.

Download link includes:

- Head without upper fangs, (no brackets needed).
- Upper fangs (must be glued to the head)
- Complete model (tree stand).

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter 0.4 mm.
Layer: 0.1mm
Filling 10 %.
Support: only in the upper fangs of the complete model.
Raft and rim: only on the tusks

Wall Tiger 

Wall Tiger - full model.stl

This model is very easy to print, it does not need any support.

Ideal for small plants such as cacti or succulents.

For personal use only

By downloading my models you have no right to sell any digital file or printed model of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 50°.
Nozzle diameter 0.4 mm.
Layer: 0.1mm
Filling 10 %.
Support: no
Raft and rim: no

Puma Pot

PUMA_Flowerpot.stl

Decorate your home or work desk with this very easy to print template, no support needed.

The download link includes two formats:
- Flowerpot
- Pencil holder

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.2mm
Filling 10 or 15 %.
Support: no
Raft and rim: no 

Buddha, flowerpot and pencil holder

Buddha_Flowerpot.stl

Meet Mario Juano, the man who smokes a lot.

The download link includes the complete sheet and the base.

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter: 0.4 mm.
Layer: 0.05mm or 0.1mm.
Filling 15 %.
Support: Yes (on tree)
Raft and edge: Yes. 

Mr. Mario Juano

Mario Juano.stl

Evil twin brother of Santa Claus, also known as Satan Claus or Dark Old Man.
He steals the gifts left by Santa with the help of his evil elves.

NOT AS DISCREET AS THE REAL SANTA.

Easy to print

Download link includes two formats:
- Wall Hanger for Christmas Keys or Boots.
- Christmas tree ornament
(no stand needed).

For personal use only

By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA (print in high quality for an optimal result)
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 15 %.
Support: No
Raft and rim: No. 

Satan Claus

Satan Claus_Wall.stl

Decorate your home with this easy to print and fun to paint model.

(no support needed).

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
PipeCox authorized seller badge to sell physical copies.
https://www.patreon.com/pipecox
https://www.myminifactory.com/es/users/PipeCox?show=tribe
3D PRINTING PARAMETERS
PLA (print in high quality for an optimal result)

Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 10 %.
Support: No
Raft and rim: No. 

Hooded girl

Hooded girl_Wall.stl

Goddesses of love, beauty and fertility.

Decorate your home with this pair of pots, very easy to print without any support, Ideal for small plants such as cactus or succulents.

The download link includes the 2 models and the base for water drainage.

For personal use only
By downloading my models you have no right to sell any digital file or printed model of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 215°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.2mm
Filling 10 %.
Support: No
Raft: Yes. 

Venus y Afrodita

Venus.stl

Feline head to decorate your home, this Puma model is very easy to print and does not need supports, it has a hole to fix it on the wall.

For personal use only
By downloading my models you do not have the right to sell any digital file or printed model of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 10 %.
Support: No
Raft and rim: No

Puma Wall

Puma_wall.stl

Fun decoration for your home, this frog model is very easy to print and does not need supports, it has a hole to fix it on the wall.

"R. darwinii" endangered species.

For personal use only
By downloading my models you have no right to sell any digital files or printed models of my designs.
Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

Painting process

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer 0.05mm
Filling 10 %.
Support: No
Raft and rim: No 

Darwin Wall Frog

Darwin_Frog_Wall.stl

If you are looking for a fun decoration for your home or your child's room, this is the model you need. This chameleon head is very easy to print without any support, but it cannot change color, so you will have to choose the right filament or paint it.

For personal use only

By downloading my models you have no right to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 20 %.
Support: No
Raft and rim: No 

Wall Chameleon

Chameleon Wall.stl

Wall decoration
Easy to print (no backing)

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: from 0.05mm or 0.1mm.
Filling 10 %.
Support: No
Raft and rim: No 

Oni Wall Mask

Oni_Wall_Mask.stl

Includes the 4 models, in one piece and also the option of separate pieces:
head, arms and body.

For personal use only

By downloading my models you have no right to sell any digital file or printed model of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer 0.05mm or 0.1mm.
Filling 20 %.
Support: Yes
Raft and rim: Yes. 

4 Aliens

Alien_4_Pipecox.stl

Rhinoceros Wall Hanging

Easy to print (no brackets)

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 10 %.
Support: No
Raft and rim: No 

Rhinoceros

Rino_Wall_PipeCoxStl.3mf

Set of Hanging Figures; Chimpanzee, Gorilla and Mandrill.
Can be scaled to desired size.

Easy to print (no backing)

For personal use only
By downloading my models you are not entitled to sell any digital files or printed models of my designs.

Join my Patreon or MyMiniFactory's My TRIBES and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
-PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe

3D PRINTING PARAMETERS
PLA
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 20 %.
Support: No
Raft and rim: No 

Monkey Set 

Mandril_PipeCox.stl


Decorate your home this Christmas with this easy-to-print Santa Claus template.

The download link includes two formats:

    Wall Hanger for Christmas Keys or Christmas Boots
    Christmas tree ornament

(no stand needed).


For personal use only

By downloading my patterns you do not have the right to sell any digital files or printed patterns of my designs.

Join my Patreon AND my Tribe and you will have access to:

-Welcome Pack with more than 30 models, includes exclusive models for subscribers, new models and a BONUS with previously published models.
-Codes with a 50% discount on previous models, valid for cultos3D.
- PipeCox authorized seller badge to sell physical copies.

Patreon:

https://www.patreon.com/pipecox

Tribe:

https://www.myminifactory.com/es/users/PipeCox?show=tribe


3D printing parameters

PLA (print in high quality for optimal result)
Nozzle temperature: 210°.
Thermal bed temperature: 60°.
Nozzle diameter 0.4 mm.
Layer: 0.05mm
Filling 15 %.
Support: No
Raft and rim: No.



Santa Claus

Santa Claus_Wall.stl

Hi, my name is Felipe, I am a 3d designer and painter.
I've always liked to create characters, most of my models are easy to print, fun to paint and collect.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

PipeCox

Achievements

Debutant

Sapling