Kyle W

Hextraction Skyrail Tile

by
NoStepOnDeez
Follow
Follow
Remix Model
NoStepOnDeez
NoStepOnDeez
|
Image 1 of 5
Hextraction Skyrail Tile 3d model
NoStepOnDeez
NoStepOnDeez
|
Image 1 of 5
Hextraction Skyrail Tile 3d model
2D
3D
Makes
Hextraction Skyrail Tile 3d model
Hextraction Skyrail Tile 3d model
Hextraction Skyrail Tile 3d model
Hextraction Skyrail Tile 3d model
Hextraction Skyrail Tile 3d model

Travel across the board, up and over other tiles with this all-in-one Combo!

Card Rules Text Setup: Connect with a rail. Limit: Must be played so they can be connected with a rail.

House Rules This also comes with a Long Rail, which doesn't fit within the Combo itself, so it's technically Forbidden. It can be used with house rules if everyone agrees. If you do print the Long Rail, keep it in the Virtual Pool.

Printing/Assembly Instructions

  • Print the Rails in a contrasting color to your board and hooks facing up. Supports are not needed.
  • The combo should be press-fit when the In & Out are assembled. If it doesn't stay together, glue in two 6x2mm magnets on each to keep it closed. Remember to check your polarities. *Glue the Arrows in while you're doing the retaining magnets.
  • If the Rail hooks don't go into the grooves when on the board, snip one side flush and cut to length if needed. If you do this, play with the hooks in the "In" half. This seems more common with the Long Rail due to board & printer variance.

This tile is part of my Connections Pack. Check the others out. Double Lane https://than.gs/m/1061128 Mechanical Link https://than.gs/m/1061125 Roadblock Wall https://than.gs/m/1093407


13 Likes73 DownloadsMay 19, 2024



13 Likes73 DownloadsMay 19, 2024