Lupa-Patchwork Doll

She prints in a few pieces that will need to be glued together. The peg (print 2 of them) helps keep the pieces in place while the glue dries.

Has a solid back version that can be personalized by adding a negative volume/part in the slicer for different magnet or jump ring sizes.

Metal jump rings were used as the earrings for the 100% Lupa. If you guys wish to print her large, I did include the hoops I created for the 285% Lupa, since I didn't have jump rings that size... and then I made a skull bead for it ^_^

Painted .3MF files are included, but you can change up the paint however you'd like!

Recommended that it is printed at 100% or larger.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

---

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!