The Bumblebee Puff is now available! 🐝

There are 2 versions for the puffling : Solid and Articulated. Make sure that you print the articulated one at 100% or larger. They print-in-place with no supports needed.

I've also included an MMU version.

The ones in the photos were printed at 100% and 300%.

8-2-23 Added a keychain version along with a modded keychain version by Jeremy (Thanks!!) ^_^

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!