For the starter pack I think it would be advisable to list all components as included. Trying to identify which bolts are included so I can print more, if they were listed it would save scrolling through the list.
I agree! My print failed (I've never had luck with long prints) so I wanted to just start printing individual items. but... I wasn't sure what they were. Had to open the build plates and start deleting things instead. However, I wasn't sure what to name the files!
You might want to bundle the Accessories a little differently. I can print the tiles no problem on my Ender but can't print the Accessories so ended up having to download them per model anyway. Maybe 2 stls that are no larger than the tiles not stacked.
Is there a smaller stack option that I can use to test my settings? I have a K1 Max and use creality print (horrible slicer) but it allows for the all the K1s bells and whistles to work. I will of course provide what works in the comment of a test model for other users.
I have a K1 Max and hated Creality Print. I followed the octoeverywhere guide and installed Fluidd. I now use OrcaSlicer since they have a preset available. It was essentially plug and play. I enjoy it much more. I printed the 8x8 multi stack which took about 34 hours in black PLA. If you want to test your settings, there is a test print available with like 2 little pieces. You can print the test print in about 12 minutes.
For some reason when trying to print stacked tiles in Orca, I keep getting the following error messages: Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating print point accuracy. Add :G92 E0" to layer_gcode.
Or In Bambu: It seems object 4x4 Single - Multiboard Border Tile x4 Ironing Stack.stl has floating cantilever. Please re-orient the object or enable support generation.
How do I go about correcting these to be able to stack print?
I'm in the same boat, did you happen to figure out the problem? I have the H2D, and when i download a file and put it in bambus slicer it comes up loaded for the A1 mini and if I select the H2D all the parts on the build plate disappear.
Discussions — Multiboard Learning Pack
For the starter pack I think it would be advisable to list all components as included. Trying to identify which bolts are included so I can print more, if they were listed it would save scrolling through the list.
I agree! My print failed (I've never had luck with long prints) so I wanted to just start printing individual items. but... I wasn't sure what they were. Had to open the build plates and start deleting things instead. However, I wasn't sure what to name the files!
Heads up - parts in pack are not the same as in video. Difference to avoid surprise:
Thank you! It's so frustrating the creator seems to insist on using videos as primary documentation rather than text.
You might want to bundle the Accessories a little differently. I can print the tiles no problem on my Ender but can't print the Accessories so ended up having to download them per model anyway. Maybe 2 stls that are no larger than the tiles not stacked.
Your slicer should have an option to break it into parts.
creality and cura wont let me separate the parts. is there somewhere else that people recommend
Check out the mesh tools plugin in Cura. Should help split them.
thank you ! I did not know. brillant !
PrusaSlicer does it. You just have to know how.
orca does
@multiboard Which color filament do you use?
Is there a Multi Material Stacked version of the 1B object?
Is there a smaller stack option that I can use to test my settings? I have a K1 Max and use creality print (horrible slicer) but it allows for the all the K1s bells and whistles to work. I will of course provide what works in the comment of a test model for other users.
I have a K1 Max and hated Creality Print. I followed the octoeverywhere guide and installed Fluidd. I now use OrcaSlicer since they have a preset available. It was essentially plug and play. I enjoy it much more. I printed the 8x8 multi stack which took about 34 hours in black PLA. If you want to test your settings, there is a test print available with like 2 little pieces. You can print the test print in about 12 minutes.
34 hours, man times have changed... It's about 14 on the Kobra S1
For some reason when trying to print stacked tiles in Orca, I keep getting the following error messages: Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating print point accuracy. Add :G92 E0" to layer_gcode.
Or In Bambu: It seems object 4x4 Single - Multiboard Border Tile x4 Ironing Stack.stl has floating cantilever. Please re-orient the object or enable support generation.
How do I go about correcting these to be able to stack print?
What exactly are those snaps called?
I'm unable to find those on thanks.com :-|
Tested with PETG-CF - worked perfectly. Video and parts are in sync. No issues at all. Thanks a lot!
I think my printing settings might be wrong. Which configuration should I use? Layer height, infill, etc ?
I tried to print on my Bambu P1S. It said that the files were not compatible for the printer. Trying to troubleshoot, but getting nowhere.
I'm in the same boat, did you happen to figure out the problem? I have the H2D, and when i download a file and put it in bambus slicer it comes up loaded for the A1 mini and if I select the H2D all the parts on the build plate disappear.
how do I make this fit on the ender 3 v3 ke print bed?
Hi, I printed with the printing guidelines but there are too tight and cannot inset in the board. I printed in SUNLU PLA+
anyone else getting non-manifold edges error when importing into Bambu Studio?
Same here...was it a big issue in the end?
Does this need any supports?
i use supports for the angle brackets (the holes), 95%of the parts are orentated for maximum strength and do not need supports.