A TMNT Ooze Canister shaped shelf 🐢🐢🐢

**NOTE :** 
📌 FIGURES NOT INCLUDED!

**Print Settings :**
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG. Brim required on Ooze Parts. Supports not required.
3MF Files Prepared for PLA (adjust according to your filament specs).
Assemble & glue joints as per assembly (super glue or similar).

**Amazon Link for LED Remote Controlled Strip Used :** 
📌 https://amzn.eu/d/gkgYFBU


TMNT Shelf (TGRI Ooze Canister)

TMNT-R04-FULL-ASY.STL

A Hero Trophy Shelf, designed by a real fan 😎🗡

📌**To watch the full CAD modeling session on YouTube :** 👀🎬
https://www.youtube.com/watch?v=DXmu3y2j6F8

**Print Settings :**
**Print 1 : **
Shelf : 0.3MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time.
**Print 2 : **
Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element.
**Print 3 : **
Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG.

📌Note 1 : STL File is the full assembly, split parts in slicer to get individual parts.
📌Note 2 : 3MF Files prepared with the above settings including part split.
📌Note 3 : The shelf design files are my own IP, the STL file is only for the shelf and it's 
                     accessories. Trophy model is NOT included.

Hero Trophy Shelf - AC Odyssey

WTS-R02-ODYSSEY.STL

AnyConv.com__WTS-R02-AC-LOGO.stl

A Hero Wall Mount with an optional LED light 🤩

**📌To watch the full CAD modeling session on YouTube :👀🎬**
 https://www.youtube.com/watch?v=QkkwkRpftOc 

**Print Settings :** 
Print profile in 3MF File.



Hero Helmet Wall Mount

HHW-R00.STL

A Hero Trophy Shelf, designed by a real fan 🤖🤩
**Print Settings :**
**Print 1 :**
Shelf : 0.3MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time.
**Print 2 :**
Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element.
**Print 3 :**
Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG.

📌Note 1 : STL File is the full assembly, split parts in slicer to get individual parts.
📌Note 2 : 3MF Files prepared with the above settings including part split.
📌Note 3 : The shelf design files are my own IP, the STL file is only for the shelf and it's
                     accessories. Trophy model is NOT included.



Hero Trophy Shelf - Iron Man

WTS-R03-IRONMAN-MINIMAL.STL

An invisible shelf for your Funkos 🤩

📌**To watch the full CAD modeling session on YouTube :**👀🎬

**Part 1:**
 https://www.youtube.com/watch?v=IAHuMBExvg0&t=1162s 

**Part 2:**
https://www.youtube.com/watch?v=T1Zk_YbRxLY

**Print Settings :**
Print profile in 3MF File.

Funko Ninja Shelf

FNS-R03-162X90.STL

A Hero Trophy Shelf, designed by a real fan 😎🪓

📌**To watch the full CAD modeling session on YouTube :** 👀🎬
https://www.youtube.com/watch?v=DXmu3y2j6F8

**Print Settings** : 
**Print 1** : 
Shelf : 0.3MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time.
**Print 2** :
 Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element.
**Print 3** :
Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG.

📌Note 1 : STL File is the full assembly, split parts in slicer to get individual parts.
📌Note 2 : 3MF Files prepared with the above settings including part split.
📌Note 3 : The shelf design files are my own IP, the STL file is only for the shelf and it's 
                     accessories. Trophy model is NOT included.

Hero Trophy Shelf - AC Valhalla

WTS-R02-VALHALLA.STL

A Power Rangers themed shelf for your mini figures ⚡🤩
📌 Figure NOT included, Shelf Design Only!
**Print Settings :**
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG.
3MF Files Prepared for PLA.

Power Rangers Mini-Figure Shelf

PRS-R03.STL

A Hero Trophy Shelf, designed by a real fan 🐉🤩
**Print Settings :**
**Print 1 :**
Shelf : 0.3MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time.
**Print 2 :**
Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element.
**Print 3 :**
Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG.

📌Note 1 : STL File is the full assembly, split parts in slicer to get individual parts.
📌Note 2 : 3MF Files prepared with the above settings including part split.
📌Note 3 : The shelf design files are my own IP, the STL file is only for the shelf and it's
accessories. Trophy model is NOT included.



Hero Trophy Shelf - Mortal Kombat

WTS-R06-MORTAL-KOMBAT.STL

A Power Rangers themed shelf for your mini figures⚡⚡

📌 Note 1: Figure NOT included, Shelf Design Only
📌 Note 2: Light ring is optional, but highly recommended 

**Print Settings :**
0.3MM Layer Height (Or Higher Quality), 15% Infill - PLA, ABS, PETG.

3MF Files Prepared for PLA.
**Amazon Link for LED Ring Used :** 
📌 https://amzn.eu/d/1v4od5U

Power Rangers Pedestal

PRD-R01.STL

A Hero Trophy Shelf, designed by an AC real fan 🤩
**📌 To watch the full CAD modeling session on YouTube :👀🎬**
**Part 1 :**
https://www.youtube.com/watch?v=txiARoZTYH0
**Part 2 :**
https://www.youtube.com/watch?v=ooZFXu5kI7s
**Print Settings :**
Print profile in 3MF File.


Hero Trophy Shelf - AC SHADOWS

WTS-R10-AC_SHAODWS.3mf

A Hero Trophy Shelf, designed by a real fan 😎🏹

 📌**To watch the full CAD modeling session on YouTube :** 👀🎬
https://www.youtube.com/watch?v=DXmu3y2j6F8

**Print Settings :**
**Print 1** : 
Shelf : 0.3MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time.
**Print 2** : 
Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element.
**Print 3** : 
Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG.

📌Note 1 : STL File is the full assembly, split parts in slicer to get individual parts.
📌Note 2 : 3MF Files prepared with the above settings including part split.
📌Note 3 : The shelf design files are my own IP, the STL file is only for the shelf and it's 
                     accessories. Trophy model is NOT included.

Hero Trophy Shelf - AC Origins

WTS-R02-ORIGINS.STL

Mo's Shelf Designs

- Get **5 high quality models / month**, including 1 exclusive model that's not available on the Model Store
- All models are thoughtfully designed to print easily
- **Save 30%** when you choose an Annual Plan
- Files are for personal use


Personal

- Limited to Islamic Designs
- Unlock a **Commercial License** to sell physical 3D prints anywhere you want
- **Unlimited **downloads from the entire library of Lofted Goods designs
- Start selling right away with access to high quality photos for your listings
- **Save 30%** when you choose an Annual Plan


Commercial - Islamic Designs Only

- Get **20 high quality models / month**, including 1 exclusive model that's not available on the Model Store
- All models are designed to print easily
- **Save 30%** when you choose an Annual Plan
- Files are for personal use

Enthusiast

- Unlock a **Commercial License** to sell physical 3D prints anywhere you want
- **Unlimited** downloads from the entire library of Lofted Goods designs
- Start selling right away with access to high quality photos for your listings
- Exclusive Discord channel - insider tips on selling, 3D printing techniques, social media help, and priority support
- **Save 30%** when you choose an Annual Plan


Commercial

Smiley Emoji Box

STC-R02.3mf

PS Rotating Sign

PRS-R01.3mf

Mekkah Fridge Magnet

MFM-R00.STL

Egyptian | Designer | Engineer
[https://linktr.ee/melsharawy](url)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Mo Designs