A Hero Trophy Shelf, designed by a real Grendizer fan 🤖🐱‍🏍🔥

📌To watch the full CAD modeling session on YouTube : 👀🎬 https://www.youtube.com/watch?v=6KRKkLQ5ZZw

Print Settings :

Print Notes :

1) Shelf : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Use Lightening Infill or similar to reduce print time. 2) Bracket & Peg : 0.3MM Layer Height (Or Higher Quality), ABS or PETG. 15-20% Infill ratio to ensure robustness of mounting element. 3) Logo : 0.2MM Layer Height (Or Higher Quality), PLA, ABS or PETG. Swap filament to achieve final color combo. 4) Side notches can accept a 1.75MM filament of choice to add two colored lines on the sides of the shelf Notes : 📌 1)STL File is the full assembly, split parts in slicer to get individual parts. 📌 2) 3MF Files prepared with the above settings including part split. 📌 3) The shelf design files are my own IP, the STL file is only for the shelf and it's accessories. Trophy model is NOT included, this is a collectable from the PS5 Game. 📌 4) This is a fan made design.