Forge your warrior spirit with this original Mesh Mayhem Samurai Oni Mask, sculpted with sharp geometric lines, ceremonial contours, and a fierce expression that commands attention. Designed for makers, cosplay, and collectors, this mask blends traditional samurai aesthetics with a modern stylized edge.

The model prints in two cleanly‑splitting pieces for reliability on any FDM printer. Once joined, the seam hides naturally within the mask’s structure, giving you a smooth, unified final piece ready for sanding, painting, and finishing. And for those building the full display set A matching Samurai Sword STL is planned for release next week, completing the theme for your shelf, wall, or cosplay load out.

Print Settings & Technical Details

Model Structure Two‑piece mask (upper section + lower jaw) Designed for FDM printers Seam placement engineered for easy cleanup and strong bonding Supports Supports required Tree supports strongly recommended Limit supports to critical overhangs only

Recommended Print Settings Layer Height: 0.16–0.2 mm Walls/Perimeters: 3–4 Infill: 10–15% (Gyroid or Cubic) Material: PLA or PLA Top/Bottom Layers: 4–6 Nozzle Temp: 200–210C (adjust to filament) Bed Temp: 60C

Orientation Tips Print how they load

Assembly Align the two halves using the built‑in geometry Bond with CA glue or epoxy Light sanding removes the seam completely Optional: add interior foam or straps for wearable builds