I printed the Bucket with Hatchbox PLA+ Brick Red filament. The bucket is 12.5' tall and holds 3.6 gallons of liquid. I'm going to print more and use them for garden planters. Stay tune for the QIDI PLUS4 11" bucket.
Great design. I love these mini buckets. I made 6 of them and they are very handy. I like the way they are able to stack to save space when in storage. Thank you so much for posting
Randy
Printed to have a sightly place next to the printer for the threads from changing filament, offcuts of raw filament, and the nozzle wipe streak... and any other small junk from the printer, like test prints from an OpenSCAD program I'm working on.
I found that I was filling the standard-size bucket too fast while I was working on an OpenSCAD program to generate terrain tiles that would work with the HeroScape game terrain tiles, so I went back and doubled each dimension and printed it again; the bigger bucket works much better for collecting the 'almost, but not quite' prints along with the extruder poop and nozzle wipe strings.
Scaling the STL at 100, 75 and 50% all get tearing to the right of the seam and at 50%, sometimes some holes.
Nothing wrong with the design... it's user error not knowing how to correct that : )
I'd love to print this but I have an ender 3 s1 pro and with both the bucket and handle being in the same file, won't fit on the build plate and I have no ide how to get it to work.
hello, i use the Ender 3 neo, and i ran into the same issue. When i dl it as an stl file, i cannot separate the bucket from the handle, but when i dl it as original file, i am able to separate them. I hope this works for you as well.
I'm new to this. When I brought the STL into creality print, and since I was going to print handle and bucket with same color, I dragged handle onto plate with bucket. Then I got a vertical rectangle on the plate also 1/2 was red (bucket color) and 1/2 was grey (same color as the handle) I deleted the rectangle and it seems to be printing OK. Hadn't seen that before. Can anyone explain that?
Ah! Is that something related to printing in 2 colors?
Discussions — Mini 5 Gallon Bucket!
Nice
love the color
where is the lid?
It’s part of my expansion pack coming soon
Will the lid be free?
Great waiting on lid
Luke is releasing it soon
I didn't think I needed a little bucket. But now I need one. Great Design. Thanks
are we allowed to sell these buckets? I did not see a membership for commercial use
I just added a commercial membership. If you wanna sell them you can if you subscribe. If you wanna add your logo email me or message me on my Discord
hello would like commecial memeber ship
They’re available
it would fit my branding really well
I found that I was filling the standard-size bucket too fast while I was working on an OpenSCAD program to generate terrain tiles that would work with the HeroScape game terrain tiles, so I went back and doubled each dimension and printed it again; the bigger bucket works much better for collecting the 'almost, but not quite' prints along with the extruder poop and nozzle wipe strings.
I'd love to print this but I have an ender 3 s1 pro and with both the bucket and handle being in the same file, won't fit on the build plate and I have no ide how to get it to work.
hello, i use the Ender 3 neo, and i ran into the same issue. When i dl it as an stl file, i cannot separate the bucket from the handle, but when i dl it as original file, i am able to separate them. I hope this works for you as well.
Great bucket! Thank you for the design.
.... mine didn't print the bottom, what did I do wrong lol
Make sure that it s sitting flash on top of the table surface in your slicer. Sometimes it sits a bit lower.
Not sure. You can dm me on insta and I’ll make sure you get it sorted
@Lukeinthegarage, this is a really cool design!! Would you happen to have the cover for the bucket?
Dropping it shortly
Love this mini bucket @luke, can you design a lid for the mini 5 gal?
I did. Dropping it shortly
Amazing design upscaled mine but love it!
It's just a bucket, so why do I like this so much?
Can I post this on creality
I post this all creality
I will print this one day, it's on my bucket list.
Hey Luke, I love the color of the green bucket. Whats it called and whats the brand?
Randy
THANKS for a great item!
I'm new to this. When I brought the STL into creality print, and since I was going to print handle and bucket with same color, I dragged handle onto plate with bucket. Then I got a vertical rectangle on the plate also 1/2 was red (bucket color) and 1/2 was grey (same color as the handle) I deleted the rectangle and it seems to be printing OK. Hadn't seen that before. Can anyone explain that?
Ah! Is that something related to printing in 2 colors?
This is one awesome design!! THANK YOU!!!
Is there a way to get rid of or reduce the seam on the bucket
Relly cool! It would go great with my RC trucks. :)
NEEDS LEGS ON ONE OF THEM
Legs?