Toys & Puzzles for fun, mainly hard plastics for play (NOT PLA).

KPop Demon Hunters Derpy Tiger 2

DERPY TIGER KPOP_02_update.stl

3D Print Files in STL format for a 1:60 scale X-Wing ship kit card!

Each file includes:
- 1:60 scale model ship, assembled version .obj with .mtl color data
- Bambu Studio 3MF with full color data for multi-color 3d printing
- Full print settings are included in the 3MF file
- Version with connecting sprue and an alternate without
- Individual separated parts
- Optimized for proper tolerances for pressure fitting without glue
- Modeled by @PB94

X-Wing Vehicle Kit Card - 3D Print Files

X-Wing Kit Card V2 - Combined.stl

R2D2 Kit Card

STL_R2-D2_V3 Kit Card.stl

BB-8 Kit Card 

STL_B88 Kit Card_V2.stl

This might be your future favorite fidget toy - rotating rings with textures - spin them and enjoy!

Print the different styles and find your personal favorite - and then give the other prints as gifts ;-) Fits perfectly in a pocket, purse, desktop drawer or right there on your desk.

**Overview**

The Tactile Fidget Rings toy comes in multiple styles.

- Basic (just the rings - no textures)
- Lines (tilted almost-vertical lines)
- Knurled (for extra “grippynes”)
- Layers (simulating thick 3D printing layers)
- Honeycomb (hexagonal textures)
It also comes in 4 MIX versions! In the mix versions, every ring has a different texture for you to enjoy. Which one is your favorite - please share and comment!

**Assembly**
None! This is print-in-place! :-)

**Print instructions**
Here is a few ideas for slicer-settings:
- Speed on first layer: 50% (To ensure good bed adhesion take your time here!)
- Supports: NO supports
- Brim: NO brim

Happy printing!

Tactile Fidget Rings (spinning fun toy)

Honeycomb.stl

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
For the Name tag to work ok, I wouldnt print much smaller unless potentially in resin. Sizing up should be ok!

 Options with and without tongue, as well as hole for ornament or keychain!

Capture the magic of pop culture with this unique 'Jeff The Shark Flexi Legs – Marvel Rivals' 3D model by ChelseyCreatesThings on thangs.com. This standout design showcases attention-grabbing details like Jeff’s flexible legs. For ease of versatility, the model has options with and without a tongue, making it perfect for Marvel fans to display or use as an ornament or keychain. Note that if you're considering printing the name tag, it's recommended not to print much smaller unless potentially in resin, though sizing up should be ok. Please note that under the Attribution-NonCommercial-NoDerivs (CC BY-NC-ND) License, this 3D model permits users to copy, distribute, and display the model in its original form for non-commercial purposes only, and only as long as credit is given to the creator. Explore more from ChelseyCreatesThings on thangs.com in the Pop Culture category.

Jeff The Shark Flexi Legs -Marvel Rivals

Jeff_Flexi-KeychainHole.stl

Discover the spectacular 3D model of Spiderman - Marvel - Fan Art, a striking homage to pop culture available at Thangs.com. Skillfully created by gifted designer PrintedObsession, this 3D model is exquisitely detailed, perfectly capturing the iconic superhero's dynamic pose and instantly recognizable costume. The model stands out among the "Pop Culture/All" category, offering Marvel fans an exciting opportunity to recreate their favorite comic book character in 3D form. With its intricate detailing and accurate design, the model captures Spiderman's agile elegance mid-swing, bringing the beloved web-slinger to life. The advantages of this astonishing 3D model are best witnessed via the various images available, showcasing the model from a variety of angles and highlighting every meticulous detail. The Spiderman - Marvel - Fan Art model is a perfect blend of creativity and technical precision, making it a must-have for 3D printing enthusiasts and Marvel fans alike. Remember to visit Thangs.com for more information and to explore our expansive catalog of unique 3D models.

Spiderman - Marvel - Fan Art

Spider Man Suspended.stl

Tetris type puzzle box set - use all pieces to fill the entire hole with shapes.

Set includes:
1x case
8x “1 by 4” shape
8x “Square shape”

17x “T shape”

18x “S shape”
22x “L shape”

Total print time to print all required parts is 4 hours and 39 minutes and it will use 46 meters of filament (total).

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s



HEART LOGIC PUZZLE SET

Heart_logic_puzzle_box_final.stl

[Relevant Video](https://www.youtube.com/watch?v=u4n8ECQPemc)

This wild little puzzle uses the beautiful [Kawai Tsugite joint](https://than.gs/m/920091) to strain your brain. Can you connect the 8 pieces into a solid 2x2 cube? Try not to reference the photos!

If this is too easy, the [3x3 versions](https://www.myminifactory.com/object/3d-print-150712) are sure to challenge you, or snag the [Tsugite Master Pack](https://www.myminifactory.com/object/3d-print-150725) for all the puzzles and styles!

---

No supports required. You standard print settings should work just fine! 2-3 shells for strength. 0.16mm layer height works well.

Tsugite Cube 2x2 Puzzle

a.stl

Building blocks and brainteasers are something that I loved playing with as a child and by combining these two things, I came up with the idea of the Cube puzzle. This puzzle consists of multiple parts and when they are put together correctly, a cube is formed. This might seem very easy, but It is more difficult than you would expect! 

This is Cube puzzle nr 1 and it consists of 10 unique pieces. That might seem low, but trust me - it’s plenty of challenge to fit them all together in a perfect cube!

**If you like this design don’t forget to like the design page. If you like the design, but don’t want to download it yet, be sure to add it to “collections” to not forget about it. And if you print it out, don’t forget to add a make and show off your Cube puzzle nr.1.**

Cube puzzle nr 1 takes around 4 hours of total print time and uses 46.5  meters of material (based on printing on default settings of Bambu Lab P1P printer). All parts are rotated for the optimal print speed (some of the pieces require the supports, but all supportable faces are flat)

If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to**[ join Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671)**. There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!


Cube Puzzle Nr 1

Cube_Puzzle_nr_1_Piece_1.stl

I used to love these kinds of puzzles where you have a set number of pieces and you have to assemble them into an object. But now, 3D printing enables me to create my own versions of this brian teaser. I have uploaded 5 different puzzles each making a sphere once assembled. 

This is Sphere Puzzle nr 1. It is made from 7 pieces, but don’t let yourself think that it will be a very simple solution. It will give you a challenge, but that’s the fun part.

**If you like this design don’t forget to like the design page. If you like the design,but don’t want to download it yet, be sure to add it to “collections” to not forget about it. And if you print it out, don’t forget to add a make and show off your Sphere puzzle nr.1.**

This Sphere puzzle takes 3 hours of total print time and uses 34 meters of material (based on printing on default settings of Bambu Lab P1P printer).

Due to the nature of the pieces, some of them will require supports, however, the supported areas are all flat and it’s easy to remove the supports. (I used organic tree supports with 0.1mm distance from the top and with max bridge length of 1 mm).

**If you want to hear about upcoming designs, have a little sneak peaks and be a part of  a maze, puzzle and other brain teaser lover community, make sure to [join Mazetropolis Facebook community](https://www.facebook.com/groups/1516788695908671). There will be a giveaway once we reach 100 members in the group. Be among the first ones and get the most out of it!**


Sphere Puzzle Nr 1. - Free for limited time

Sphere_puzzle_ball_level_1_piece_1.stl

This 3x3 unit puzzle cube presents a quick little challenge. Assemble the cube and you win! Then you can move on to my more challenging [5x5 cube](https://than.gs/m/913877), or even the 10x10   [S U P E R C U B E](https://than.gs/m/913881)    if you dare!!!

3x3 Puzzle Cube

b.stl

Toys & Puzzles

 🎨🛠Crafter of things & stuff, 🧍🏿‍♂️🤖
🌌Let's make some dreams a reality!🌌
"Cringe, but free."

LordCrispyNuggs

Achievements

Voyager