Twisted Planter
This planter is the same design as the Cracked Spiral Planter, just without the cracked part.
These can mount to your wall using command strips or screws and feature a hidden, twist off drip tray.
Two sizes available (2.75" and 4.5") and two variations for each size (wall mounted or tabletop).
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill (gyroid for wall mounts) 2 walls
Filament & Hardware Filament: Bambu Lab Latte Brown Matte PLA Hardware: Command Medium Picture Hanging Strips #10-12 x 1-1/4 in anchors and screws
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods
Twisted Planter
Square Bubbles Planter
Plastic Bag Dispenser
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
Is it possible to add lighting to this model at the bottom, like this one?
https://thangs.com/designer/LoftedGoods/3d-model/Wall%20Light%20Planter%20-%20The%20Grid-1376432
I got my self this very nice pot to go with the rail, as i just love the concept.
My issue though: I dont have that nice snappy action in the tray. Mine just freely rotates open and closed. Did you change that at some point? Or is it a problem with filament or printer tolarences?