After hanging a few of these, I quickly realized the end nut was overkill and could be replaced with a hole in the bottom of the brace. I initially had other ideas where the nut may have provided value, but scrapped them during design.

I wanted to store my many rolls of tape on the wall, so I designed a Tape Roll Holder for the Multiboard Storage System.
Items needed
Multiboard Tape Roll Storage Rack - 3D Printed (at least two, more, the longer you go).
1/2" diameter PVC Pipe from your local hardware store
Small Screw to Hold Pipe Nut in place
13 mm Big Thread, Flat Head, T-Bolt (2 per brace) from "Keep Making."

Designed to be printed on its side. Does not require support.

Multiboard Tape Roll Storage Rack

Multiboard Tape Roll Storage Rack.stl

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

KeithMon

Achievements

Seedling

Voyager

Multiboard

Multiboard Tape Roll Storage Rack