Unfortunately, the print in place hinges broke and after a few open/close of the game they don't really stay together. However, I split them to objects and printed the back spine separate from the hinges and then pushed them together afterwards and it is working fine for now.
Hello! I downloaded a couple weeks ago and am finally printing. I don't have the lids for the boat compartments on my plates. There are 6 plates total one for the white board (print twice), blue cover board (print twice),white missiles, red missiles and grey boats. Let me know! Otherwise the print is fabulous
Hi! please re-download, as we have made a few small tweaks to the design to help with the fit of everything, and that way you can be sure you have the most up to date design adjustments.
Hello, I have been trying to put this file in to Ultimaker Cura to slice it, but every time I try it gives an Error or says there is no model in the file. Does anyone have any ideas to fix this? Or alternate slicers?
Hi! Due to size constraints, these would be the largest magnets that can fit for this design. However, you could look for a stronger option, in this size, rather than the ones I have listed if you prefer.
Hi, It sounds like you may have some warping that occurred during printing but without seeing it, It is hard to be certain. could you share a picture in our discord channel where we can help you some more?
Hi! I would love to help figure this out. to answer your question yes, the hinges are meant to move easily, right off the build plate. As for closing the book there could be a few things going on but without seeing it, it is hard to know exactly what is happening. Could you join our Discord to get faster help and share more information/ pictures so we can help solve this?
С магнитами просто беда. На тех панелях, которые стоят, 2 магнита не совпадают по ширине, я их приклеила. Но проблема в том, что когда 2 панели отсоединяются, магниты идут на противоположную панель
I'm sorry to hear yo are having issues with the magnets. Could you send an email with pictures of the issue to support@forgecoreco.com? That way we can see the issue and help a lot better
There isn't Agreat way to re-orient this design, since it is designed to be printed flat. Unfortunately if your build plate is smaller than 250 mm you wont be able to print this design
Discussions — PlayBook'd - Sea Battle
would this print fit on a 22x22
The largest piece is 245 mm wide. So if you are using a 220 mm build plate it unfortunately wont fit
Do you happen to have playing instructions for this?
Hello! I downloaded a couple weeks ago and am finally printing. I don't have the lids for the boat compartments on my plates. There are 6 plates total one for the white board (print twice), blue cover board (print twice),white missiles, red missiles and grey boats. Let me know! Otherwise the print is fabulous
Hi! please re-download, as we have made a few small tweaks to the design to help with the fit of everything, and that way you can be sure you have the most up to date design adjustments.
Got it, thanks!
Hello, I have been trying to put this file in to Ultimaker Cura to slice it, but every time I try it gives an Error or says there is no model in the file. Does anyone have any ideas to fix this? Or alternate slicers?
Hi! Cura isn't a fan of 3mf files. I would suggest using another slicer like Bambu Studio or Orca to open, slice, and print.
Thanks for the tip!
Any chance these can be re made to put stronger bigger magnets in .
Hi! Due to size constraints, these would be the largest magnets that can fit for this design. However, you could look for a stronger option, in this size, rather than the ones I have listed if you prefer.
the top and the bottom of both pieces aren’t aligning with each other when the book is closed, what would be a fix for that?
Hi, It sounds like you may have some warping that occurred during printing but without seeing it, It is hard to be certain. could you share a picture in our discord channel where we can help you some more?
I figured out the problem was that i wasn’t pushing the top into the hinges enough, sorry to bother!
I'm glad you figured it out! Thank you for updating!
Do the magnets need to be 5x2.8mm or is 5x3mm okay? I am struggling to fine 5x2.8mm where I am thank you :)
5x3mm work!
https://a.co/d/gWtU46j
Hi there, I am really struggling to make the book close. It won't fold. Is there any way I can get some help?
I tried to force it to close and all the hinges broke. Are the hinges supposed to be easy to move right off the bed?
Hi! I would love to help figure this out. to answer your question yes, the hinges are meant to move easily, right off the build plate. As for closing the book there could be a few things going on but without seeing it, it is hard to know exactly what is happening. Could you join our Discord to get faster help and share more information/ pictures so we can help solve this?
Thank you for your reply! Before I saw this, I tried printing it again at 50% speed and it worked! :)
will there be comming a vid or some explination on how do magnets in this one work? im a bit confused sorry
There's an instruction page that shows all the magnet orientation. Its linked above but i'll put it here for you as well! https://than.gs/pr/251672
If you have specific questions that aren't answered in those instructions please ask!
С магнитами просто беда. На тех панелях, которые стоят, 2 магнита не совпадают по ширине, я их приклеила. Но проблема в том, что когда 2 панели отсоединяются, магниты идут на противоположную панель
I'm sorry to hear yo are having issues with the magnets. Could you send an email with pictures of the issue to support@forgecoreco.com? That way we can see the issue and help a lot better
Там, где 4 магнита, их надо склеивать между собой?
and how would that orientate upwards if my height is 25
There isn't Agreat way to re-orient this design, since it is designed to be printed flat. Unfortunately if your build plate is smaller than 250 mm you wont be able to print this design