I'd love if you combined the flowers with chip clips! I know you have a few other designs that do this, but having chip clips on the fridge would ensure they're always handy!
You could add slits in them like a paper clip to hold notes or photos or find a way to hide a bottle opener or tab can opener in the petals. I don't think you need to add anything, but those are the first ideas that came to me. I have trouble getting my finger under the tab on my Monsters all the time, so something like that would be great for me! :D
Print super cleanly! No issues. I think you'll definitely want a tool to insert the magnets cleanly because by hand was kind of tricky.
Also selling this on my storefront now if you want to check it out!
Thank you for this file. I am hoping you will create something Christmas themed that's similar! Something with plants or even a string of Christmas lights. I love your designs!
Hi, it would be nice if there was a 'branch topper' to fit the bottom of the stem so that it also had a nice finish, rather than an open gap. Many thanks, great print otherwise :-D
I love this print! However, I am in desperate need of help in printing the flowers. The bottoms do great, but when it gets to about 75-80% done, they start to get knocked off the plate. I think possibly one gets loose and gets knocked off, then it pulls more off. But the actual flowers also start to get really stringy in that last 20%. I've washed my plate really well, tried glue to help hold them down, and even flipped them upside down to print. I need help! 😅
Hi, I'm so sorry they're giving you so much trouble. It sounds like the nozzle could be knockig the flowers over when switching to the next flower. You can print them one at a time or, you should be able to fix this issue by slowing the print a little and by raising your z-hop value. If you're using bambu studio: Go to your filament settings -> edit -> Setting Overrides -> Z Hop when retract and raise it to .6mm
Thanks so much for your help! My last batch of 16 flowers turned out perfectly! The z-hop value was a game changer, I think. I was only successfully getting about 1/4 of the flowers to finish before I changed the z-hop. After the z-hop change, slowing the speed down by 25%, and adding a raft, 3/4 of the flowers were successful. With this last batch, I actually increased the size of the raft from 4mm to 8mm for better support, slowed it even further after 50% done, and 100% of the flowers worked!
Apologies for that. The file should now be easier to find now if you re-download it, and don't worry, re-downloading, won’t count against your monthly downloads.
Hi, I wonder if you could help me? I am on my 3rd attempt of trying to print the branch ends, but for some reason they won't print, I have changed the settings each time but all I get is what's in the photo, the rest of the stl prints perfectly!
I forgot to mention that I am using your 3mf file, the rest of the stems all print fine, its just these ends - Please help if you can, its all I need to do to finish it!!!
Hi! We’ve made a small adjustment to the endcaps that should help improve bed adhesion. If you re-download the file, you’ll get the updated version (and don’t worry—re-downloading doesn’t count against your monthly downloads).
For additional adhesion support, we recommend giving your build plate a good clean with warm water and dish soap, and raising the bed temperature by 5–10° can also make a big difference.
UPDATE: It works!! Woohoo!! Many Thanks :-)
Also, I don't want to sound dumb but what is the dirty dishes flower for? We've had many guesses but wish to know who it right!!!! Haha
Ok, thanks, however, I really don't understand how it would work?! We don't have anything like that in rural France!!! Sorry to be a pain but would love an explanation :-)
It is optional. A dishwasher is a machine that washes dishes for you. The dirty dishes flower magnet acts a little sign you stick on the front that tells you wheather the dishes in that appliance are “clean” or “dirty” so you know whether the dishes inside are ready to use or still need washing. You would use one of the regular flowers as the "clean dishes" magnet.
I do have a video of it in use on my social media (Youtube, IG, TikTok) in the morning glory video.
Many thanks for your reply, I will re-download and re-attempt. Had no issues with adhesion, just didn't print as well as everything else, but will update soon! Thanks again! :-)
I'm having some issues fitting the magnets into the Leaves, Vine and Flowers fit fine, only the leaves are giving me a hard time. Is there a trick or do i need to get 4mm magnets?
Do you have a branch topper that can be put on the other end of the stem, trying to be able to put a leaf/flower at start of the ivy not just at the ends. Thank you!
How do you print the flowers in two different colors? I've opened both the easy print file and just the flowers in PrusaSlicer, and it's all just one color.
Hi, the flowers were printed using an AMS. They should be painted in the Easy Print 3mf but it is formatted for Bambu Studio so the colors may not appear correctly in other slicers. You can paint it yourself in your slicer or you can download Bambu Studio to use the Easy Print file.
Hello, I’m experiencing an issue while printing branch toppers on my Bambu Lab P1P using the textured build plate. The problem occurs at the open end of the topper, where the first layer begins to curl upward. As the print progresses, the nozzle continues to extrude over the curled section, leading to a tangled mess of filament. Could you advise on how to resolve this issue? Thank you.
Hi, it sounds like you are expieriencing warping issues. To fix this I would suggest washing your build plate with warm water and dish soap to get the best possible plate adhesion. You could also raise your plate temperature a few degrees, That should help.
I'm fairly new to 3D printing, but really loved this design. I am wanting to know, how many vine pieces are in the design and what length is it. In the instructions it says it takes 18 of the magnets. One section of the vine and two flowers take that many, but that makes for a very short vine. Thank you in advance for more information on your creation.
The Vines are modular so you can add as many vines, or as few, as you'd like. You just need 18 magnets per segment. That breaks down to 12 magnets on the vines and 6 split between leaves and flowers. You will need more magnets depending on how long you want your morning glorys to be. There is a PDF instruction guide to help, once you download the file.
Discussions — Morning Glory Magnets - Ivy Fridge Magnet - Flower Magnets
I'd love if you combined the flowers with chip clips! I know you have a few other designs that do this, but having chip clips on the fridge would ensure they're always handy!
The chip clip idea is genius
It has been updated to add a chip clip option, as well as a few others! I hope you enjoy!
You could add slits in them like a paper clip to hold notes or photos or find a way to hide a bottle opener or tab can opener in the petals. I don't think you need to add anything, but those are the first ideas that came to me. I have trouble getting my finger under the tab on my Monsters all the time, so something like that would be great for me! :D
any plans to make a Christmas version of this? With holly and ivy? maybe some ornament magnets to compliment like the ladybugs and butterflies.
Great Photo! FYI i made some adjustments to the magnet holes so they should go in much easier now!
Thank you for this file. I am hoping you will create something Christmas themed that's similar! Something with plants or even a string of Christmas lights. I love your designs!
Thank you for the support!
Hi, it would be nice if there was a 'branch topper' to fit the bottom of the stem so that it also had a nice finish, rather than an open gap. Many thanks, great print otherwise :-D
Thank you for the feedback!
I love this print! However, I am in desperate need of help in printing the flowers. The bottoms do great, but when it gets to about 75-80% done, they start to get knocked off the plate. I think possibly one gets loose and gets knocked off, then it pulls more off. But the actual flowers also start to get really stringy in that last 20%. I've washed my plate really well, tried glue to help hold them down, and even flipped them upside down to print. I need help! 😅
Hi, I'm so sorry they're giving you so much trouble. It sounds like the nozzle could be knockig the flowers over when switching to the next flower. You can print them one at a time or, you should be able to fix this issue by slowing the print a little and by raising your z-hop value. If you're using bambu studio: Go to your filament settings -> edit -> Setting Overrides -> Z Hop when retract and raise it to .6mm
Thanks so much for your help! My last batch of 16 flowers turned out perfectly! The z-hop value was a game changer, I think. I was only successfully getting about 1/4 of the flowers to finish before I changed the z-hop. After the z-hop change, slowing the speed down by 25%, and adding a raft, 3/4 of the flowers were successful. With this last batch, I actually increased the size of the raft from 4mm to 8mm for better support, slowed it even further after 50% done, and 100% of the flowers worked!
Thank you for the update! I'm very happy to hear that it worked out for you!
Thank you! I'll try that
I'm so glad you asked this. I am having the same problem. Will implement the suggestions on my next batch.
I don't see the Easy Print 3mf in the download am I missing anything?
Apologies for that. The file should now be easier to find now if you re-download it, and don't worry, re-downloading, won’t count against your monthly downloads.
What colour filaments do u use thank u
Hi! I have all of the filaments I used, linked in the model description!
I forgot to mention that I am using your 3mf file, the rest of the stems all print fine, its just these ends - Please help if you can, its all I need to do to finish it!!!
Hi! We’ve made a small adjustment to the endcaps that should help improve bed adhesion. If you re-download the file, you’ll get the updated version (and don’t worry—re-downloading doesn’t count against your monthly downloads).
For additional adhesion support, we recommend giving your build plate a good clean with warm water and dish soap, and raising the bed temperature by 5–10° can also make a big difference.
UPDATE: It works!! Woohoo!! Many Thanks :-) Also, I don't want to sound dumb but what is the dirty dishes flower for? We've had many guesses but wish to know who it right!!!! Haha
The Dirty dishes flower is for the dishwasher to tell you when it's dirty!
Ok, thanks, however, I really don't understand how it would work?! We don't have anything like that in rural France!!! Sorry to be a pain but would love an explanation :-)
It is optional. A dishwasher is a machine that washes dishes for you. The dirty dishes flower magnet acts a little sign you stick on the front that tells you wheather the dishes in that appliance are “clean” or “dirty” so you know whether the dishes inside are ready to use or still need washing. You would use one of the regular flowers as the "clean dishes" magnet.
I do have a video of it in use on my social media (Youtube, IG, TikTok) in the morning glory video.
Many thanks for your reply, I will re-download and re-attempt. Had no issues with adhesion, just didn't print as well as everything else, but will update soon! Thanks again! :-)
Can I print this with a Ender v3 KE or do I need a printer that can handle multiple colours?
You don't need multicolor unless you want the flowers to have 2 colors like in the pictures
the merrygold flower printed solid top fillled the entire flower with grid then a flat top how can i fix this?
I'm not entirely sure what you mean, could you elaborate? If you are using the Easy Print 3mf it should print relatively easy
I'm having some issues fitting the magnets into the Leaves, Vine and Flowers fit fine, only the leaves are giving me a hard time. Is there a trick or do i need to get 4mm magnets?
5 x3 magnets should fit snug. You may have an over extrusion issue if they arent fitting. A magnet tool like this can help with assembly: https://makerworld.com/en/models/60890-embedded-magnet-dispenser-tool-for-3d-prints?from=search#profileId-63102
can i use 6x3mm magnets?
These are designed for 5x3 magnets so 6x3 will be too big
Do you have a branch topper that can be put on the other end of the stem, trying to be able to put a leaf/flower at start of the ivy not just at the ends. Thank you!
Hi, Thanks for the suggestion. I will see what I can do.
How do you print the flowers in two different colors? I've opened both the easy print file and just the flowers in PrusaSlicer, and it's all just one color.
Hi, the flowers were printed using an AMS. They should be painted in the Easy Print 3mf but it is formatted for Bambu Studio so the colors may not appear correctly in other slicers. You can paint it yourself in your slicer or you can download Bambu Studio to use the Easy Print file.
Hello, I’m experiencing an issue while printing branch toppers on my Bambu Lab P1P using the textured build plate. The problem occurs at the open end of the topper, where the first layer begins to curl upward. As the print progresses, the nozzle continues to extrude over the curled section, leading to a tangled mess of filament. Could you advise on how to resolve this issue? Thank you.
Hi, it sounds like you are expieriencing warping issues. To fix this I would suggest washing your build plate with warm water and dish soap to get the best possible plate adhesion. You could also raise your plate temperature a few degrees, That should help.
I'm fairly new to 3D printing, but really loved this design. I am wanting to know, how many vine pieces are in the design and what length is it. In the instructions it says it takes 18 of the magnets. One section of the vine and two flowers take that many, but that makes for a very short vine. Thank you in advance for more information on your creation.
The Vines are modular so you can add as many vines, or as few, as you'd like. You just need 18 magnets per segment. That breaks down to 12 magnets on the vines and 6 split between leaves and flowers. You will need more magnets depending on how long you want your morning glorys to be. There is a PDF instruction guide to help, once you download the file.
Thank you for getting back with a reply.
If you need any additional help, feel free to reach out. We also have a discord page that can get you answers a bit faster.
I can't seem to get the flowers to print with any quality.
Hi! Are you using the 3mf? You could try using adaptive layer height
Thanks for this suggestion of adaptive layer height. My flowers look so much better using this setting!
Hello, I am trying to open *.3mf file provided in the package, in Cura 5.9.0, and it shows 'No models in file' error message. Thanks.
Hi! the 3mf will open in Bambu Studio. Cura doesn not work with these types of 3mf files!
If you still want to use Cura, you can open the files from the STL files provided