Spread St. Patrick’s Day Cheers with these Twisty Pint Fidgets 🍻 The ‘twisty liquid’ is secured to the bottom of the pint (or mug) so you can pour or spill it again and again 🙌🏼 I designed two different pints: on with a shamrock and one without.

****Instructions for 3D Printing****:
PLA for Twisty Insert & PLA or PETG for the pint (mug)
0.2mm Layer Height
0% Infill
Supports needed on pint handle

Print Plate #1 (Twisty liquid insert): 1 color, Outer wall & Inner wall Width 0.6mm, Arachne Wall Generator, 0& Infill, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s
Print Plate #2 (Pint_plain): 1 color, Arachne Wall Generator, 0% Infill for pint, 25% infill for screw & clover key, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s
Print Plate #3 (Pint_with Shamrock): 1 color, Arachne Wall Generator, 0% Infill for pint, 25% infill for screw & clover key, Outer Wall speed 50mm/s & Inner Wall Speed 100mm/s

****Assembly****: Insert the twisty liquid insert into the pint so that the screw hole is at the bottom of the pint (will fit into corresponding shape). Insert the screw and tighten with the Clover Ke.

Have fun printing! 
🍀 Erin


Twisty Pint Fidget (2 Styles)

Twisty Pint Fidget.3mf

[Instructions](https://prinnit.com/ForgeCore/design/36AGnbxpR8NxosgbOE1vhnFGONt?tab=instructions&highlight=instructions)
[Hardware](https://prinnit.com/ForgeCore/design/36AGnbxpR8NxosgbOE1vhnFGONt?section=hardware&highlight=hardware)
[Filaments](https://prinnit.com/ForgeCore/design/36AGnbxpR8NxosgbOE1vhnFGONt?section=filaments&highlight=filaments)

**Social Signal** - _Intermediate_
The best way to signal if you don't want to be bothered. Use it outside your room to let people know if you're feeling antisocial OR if you're just busy with work.

[🟢Helpful Instructions🟢](https://than.gs/pr/251384)
- - - - - - - - - - - - - - - - - - - -
**Mounts on your wall or rests on your desk**
The stop light is designed so it can sit on your desk, or mount on the wall. Use it in your home office, or outside your room. You can mount it to the wall using command strips

- - - - - - - - - - - - - - 
**How does it work?**
The puck light sits in a track inside the social signal. Theres a slider on the side so you can change the color based on how busy you are. Magnets hold the light in place.

The colors aren't actually a different light. They are printed lenses! Heat up the lens, press it in the form, and you gets a nice curved lens. You can use a heat gun or hot water to heat the lens. *If you are using hot water I was able to by microwaving a mug of water for 2 minutes and 30 seconds*

- - - - - - - - - - - - - - - - - - - - - - 


Social Signal

Social Signal.3mf

UPDATE (11-21-2025): Updated the cranberry that was 10X too large (V2) with one the correct size (V3)

**Special Note: **MakerWorld user @HotFix has given their blessing to incorporate their genius idea of the pie tin and cranberry on the front of the turkey leg into the official model for everyone to enjoy. 
Please check out their MakerWorld profile located here: [@HotFix MakerWorld user profile ](https://makerworld.com/en/@HotFix)

The zany holiday meal themed starship is based on the original Star Trek series Enterprise.

The perfect Thanksgiving/Holiday centerpiece for the hard core Star Trek fan.

Parts fit together and should stay without glue. If you plan on handling the model and not just using it as a display piece, some glue is recommended. Especially in the neck to turkey leg connection.

A new Bambu Studio Project file is included featuring all the print settings I used to print the version shown. It has some time saving tweaks, such as printing .24mm layers and lightening infill on the pie filling until the top and then using 0.08mm layers to get that bumpy pumpkin pie details. The awesome Pie tin and cranberry dish on the front of the turkey leg dreamed up by MakerWorld user @HotFix has been incorporated into the official model and is included in the V2 Bambu Studio Project. Brilliant @HotFix!!! 

V2 Changes:

- Pie tin and cranberry dish added (concept by MakerWorld user @HotFix
- Mounting hole on turkey leg for base connection reduced slightly for a tighter fit
-  Both bases have a void added to the top section to strengthen that area (suggested by MakerWorld user @HotFix)

@HotFix also suggested a void in the pin area of the stands to print perimeter layers on the interior to strengthen that area. 
**NOTE: you must switch the “Slicing Mode” located under the “Slicing” section on the "Advanced" section to “Even-odd” to get the void to print correctly in Prusa Slicer
(located under the “Special mode” section on the "Others" tab in Bambu Studio.)**
 
Filaments used:
Pie Crust: Aceaddity Wood PLA
Pie Filling: Printed Solid Brad's Orange Glitter
Whipped Cream: PolyMaker Polylite White PLA
Turkey Leg: Unknown Brown PLA & Aceddity Wood PLA
Base: Unknown Silk Gold PLA
Corn Cobs: Voxel Yellow PLA
Forks: PolyMaker Silk Silver PLA
Neck: Unknown Brown PLA 
Pie tin dish: PolyMaker Silk Silver PLA
Cranberry: PolyMaker Silk Santa's Velvet Red PLA

Starship EnterPies

Starship_EnterPies_PieFilling_V1.stl

Starship_EnterPies_TurkeyLeg_V2.stl

Starship_EnterPies_Pie Tin_V2.stl

Starship_EnterPies_Cranberry_V2.stl

Starship_EnterPies_V2_BambuStudioProject.3mf

Starship_EnterPies_WishBoneStand_V2.stl

Awesome Designs

Engineer working as a manager so I get into hobbies like 3d printing to be able to work the gEEk side of my brain!

Free my models 3241840433d9f49cee

Flyrockets

Achievements

Novice Maker

Voyager

Awesome Designs

Twisty Pint Fidget (2 Styles)

Social Signal

Starship EnterPies