Sovol SV08 Enclosure with Filter

top.STEP

This is a slim version for having cable chain on the Sovol SV08 
All the part are pre oriented in the best position.
Only the cover needs little support, the rest they don't need support and only for the clips if you don't have good adhesion you might need brim. 
recommended in ABS especially if you enclose your 3d printer.

For the Sovol SV08 you will need 25 Clips and 25 Chains

Bom
1x M3x8mm 
1x M3 T-nut
and reuse the original cable holder screw.


Sovol SV08 Cable chain 

cable chain.stl

Huge bed with an inductive probe that's temperature sensitive?? No thanks!!
BIGTREETECH's new EDDY sensor comes to the new Sovol SV08! Easy replacement for the original probe, but does require disassembly of the BTT Eddy probe to re-house the board; might be good to add a small heatsink onto the RP2040 chip as a result. 
[CAD available here!](tinyurl.com/2lpsv08)

Recommended printed out of ABS/ASA for temperature resistance, print with the logo facing the bed, 3 walls, 0.1 layer height, with auto supports (for the lil dangly bit). You'll also need some teeny screws so [here's an affiliate link for a nice kit!] (https://amzn.to/4aSc7Hz). M1.7x4mm should work, and it's aways good to have more hardware on hand.

Update: added the STEP files of the case/PCB that I had to recreate in part for this model. Feel free to use em, CAD's in Onshape here: https://cad.onshape.com/documents/6cbf60e4103aaa5deed66867/w/2d6c64846d93a5045a62152f/e/048ed866265d810353a37313

BTT Eddy SV08 Mount

BTT Eddy SV08 Mount.stl

SV08

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

ElRay70K70H

Achievements

Voyager

SV08

Sovol SV08 Enclosure with Filter

Sovol SV08 Cable chain

BTT Eddy SV08 Mount