C
Awarded to:Crocodonkey
First Make published
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
DigitalDigital Store
Bundle
PrintsPrint Store
My Thangs
Access 15,000+ models$14.99/month
profile hero image
C

Crocodonkey

0 followers0 downloads

Achievements

First Make published badge
Novice Maker
First Make published
All
Sort by:

Tilt Lamp

Tilt Lamp - Printed in Elegoo Wood PLA and Overture Matte White. I used a 0.4mm nozzle at 0.16mm layer heights for the base and a 0.6mm nozzle at 0.18mm layer heights + 1.2mm line widths for the shade, which was in lamp mode. I considered printing the base upside down to avoid supports, but decided against it since most of the weight would be in the air. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb - 3d model

Nora Lamp

Nora Lamp - Printed in Overture Matte Black/White. Base placed upside down on the print bed to avoid supports, and I printed the shade in vase mode with a 0.6mm line width to diffuse the light more. Base was 5% infill with 2 walls, but I added a modifier to the area that will be on the table to make it bottom-heavy with 30% infill. I use Aliexpress cords for all of my lamps and they unfortunately do not have a section that helps to lock against the lip. I modified an E27 collar from Printables to act as a collar to secure the light bulb. I then just used a soft white LED bulb - 3d model

Planter with Legs

Planter with Legs - Printed in Polyterra Army Dark Green and Overture Matte White. I ironed the legs to make them look more intentional. Scaled to 140% to basically max out my printer, ended up taking ~28 hours. Added basic supports to the bottom and it doesn't seem noticeable. 2 walls with 7% gyroid infill feels very solid - 3d model

Lara Lamp

Lara Lamp - Love how this looks! Unfortunately my socket didn't fit well with the base - it'd be very helpful if the author provided a link/dimensions to the socket used. Had to modify the base to be taller to accommodate the socket, and I also wanted the bulb to be centered within the lamp. Also updated the cutout for the cord. I'm using a 40 watt A19 LED bulb. Also created a simple lid so that this wasn't creating an upward spotlight. 0.2 layer height with 0.8 layer width for structure/diffusion. - 3d model
AboutBlog
Apps
Download ThangsThangs SyncBlender AddoniOSAndroid
Help
HelpFAQSupport
Legal
LegalTerms & ConditionsPrivacy PolicyContent Policy
Feedback