Cinderwing3D15K followers

Festive T-Rex

3K downloads · 2 years ago · Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun des

This model is restricted by licensing terms.

View license.

Description

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

Commercial License and monthly bonus models: Thangs Memberships Patreon MMF Tribes 3D PRINTING SETTINGS FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.

Community Makes (3)

I created this as a "Christmasaurus" T-Rex and it came out beautifully!

Community Makes (3)

Discussions

PerleForge6 months ago

I created this as a "Christmasaurus" T-Rex and it came out beautifully!

Dorminyk1 month ago

CarterCreates3D7 months ago

Hey, Cinderwing3D. How do I make these mini? Yours are so much smaller than my finished product.

CarterCreates3D7 months ago

Update...I got it down to 50% scale and it's printing well.

CarterCreates3D7 months ago

Hey, Cinderwing3D...thanks for this adorable print. We have tried to scale it down to a smaller size but the print is not working. We own a Bambu Lab A1 and are using Bambu PLA filament, do you have any suggestions? Thank you!

Cinderwing3D7 months ago

Hey there! My models are tested between 60-100%! Outside of that depends on your printer and its settings! Since you have an A1 I'd recommend checking that your filament settings are at 100% cooling!

dbrabrown2 years ago

I get an error in OrcaSlicer for this : Warning - object has floating cantilever. Please re-orient the object or enable support generation. I do see blue above the leg openings... Should I be concerned?

Cinderwing3D2 years ago

Nope, you can print it as is.