I had a vision of the cat dragon's head sitting up in a cute cat pose and worked hard to make this happen! It prints with the neck and head down, and clicks and locks up after printing. The wings also print aligned and fan out after printing. I have designed the wings slightly different then previous wings. You should be able to hook the wings flaps past each other to hold the wing in a fan out position (please see pictures). It's also decorated with fur, scales, and dragon horns! Hope you all enjoy this design! Thank you!

I have also included some .3MF Color files! The 2 Color version painted by me! The 4 Colors Tabby painted by Toad (I slightly modified the Tabby paint job for the release photos!) 3mf alt by omegawat

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Try brims if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.