The Great Escape - Launching into the Void to Avoid Damnation - Hueforge Wallart
3rd model tonight:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.23x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.04431mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #482960 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #a3d8e1 PLA Bambu Labs Matte Ice Blue (11601) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Indigo Purple (10701) At layer #9 (0.8mm) swap to Beige (10201) At layer #15 (1.28mm) swap to Ice Blue (11601) for the rest.






















