Its for an fdm printer so PLA PETG etc. Its designed to print without supports using stock slicer profiles, you just need to set your layer height to 0.3mm.
I just found it, it's not in print settings, it's in the printer settings. Click on the pencil icon to the right of "Bambu Lab X1 Carbon 0.4 nozzle" and you'll find the checkbox on the Extruder tab of the dialog box that pops up. I'm not sure if that setting will get saved when you save the project so double check it's correct when you actually go to print. It's also in the filament settings in the overrides tab.
Hi there, firstly make sure that your layer height and your initial layer height are both set to 0.3mm. Then make sure Arachne is chosen under perimeter generator. Hopefully this will resolve the issue. :)
Great design! However, could you please provide more information on settings for the slicer e.g. Bambu Studio? In my case the regions near the bottom and top are not being bridged. As a result the slicer says "The object has empty layers between x and y can't be printed."
Thanks!
Discussions — Twisty String Vase
Lovely vase! I used PETG and put manual supports on the outside walls for print stability. Turned out very well - thanks for the model!
what software do use to create your models?
GREAT WORK CONGRATULANTIONS
Is this for PLA or resin? Not sure how PLA can print without supports.
Do you have a suggestion on the best CURA settings for this or do you really need bamboo?
Its for an fdm printer so PLA PETG etc. Its designed to print without supports using stock slicer profiles, you just need to set your layer height to 0.3mm.
Amazing.
i should print without support right
Yes :)
Beautiful print, Thanks!
Thank you for sharing such a wonderful design @
How I download this?
How I download this?
HI, great design but i cant figure out where to turn off "wipe while retracting" in bambu lab.
I just found it, it's not in print settings, it's in the printer settings. Click on the pencil icon to the right of "Bambu Lab X1 Carbon 0.4 nozzle" and you'll find the checkbox on the Extruder tab of the dialog box that pops up. I'm not sure if that setting will get saved when you save the project so double check it's correct when you actually go to print. It's also in the filament settings in the overrides tab.
Hellow in the prusa I didn't find this parameter The object has empty layers between x and y can't be printed."
Hi there, firstly make sure that your layer height and your initial layer height are both set to 0.3mm. Then make sure Arachne is chosen under perimeter generator. Hopefully this will resolve the issue. :)
Great design! However, could you please provide more information on settings for the slicer e.g. Bambu Studio? In my case the regions near the bottom and top are not being bridged. As a result the slicer says "The object has empty layers between x and y can't be printed." Thanks!
hi how to use Arachne in Bambu Studio?
Found out: you have to use "Arachne", then all the bridges are there.
Hay. I can't print. Cura prints without threads, only stands.
Check the print thin lines box, hopefully this will help
Love it
Donde lo puedo bajar el stl gracias
text
Donde lo puedo bajar el stl gracias
Brilliant! 🫶🏻
Thank you :)