Ok so I did peach inspired go kart. Going to do another 2 sets of different people. First part of the kart messed up but that’s on me. I think my filament is kinda poo, but I’ll manage. It’ll be better next time around. But overall this is a good tester to do. I did rainbow rims for her kart. But it’s nice. This is the OLED version.
He usado soporte porque la base numero 2 se me despegaba imprimiendolo en vertical asi que lo hice en horizontal, tambien para las pequeñas partes he usado brim.
Impreso en una Creality Hi
Excellent design!! I'd like to know if you used glue to join the pieces or if they fit together perfectly. In my case, the pieces don't fit together. I don't know if it's because of my printer. When will you be able to upload the .stl files?
Ok so I’m printing the second part. But for me I have to use supports for the base. I don’t know how it’s how to print without them. I have a k1 speedy. So maybe it’s different?
no the issue I was coming across is that by default it puts it on its side when i load it in. So sideways it has to have supports, I didnt see until i printed the first part out and rotated the second half, where the flat part was. So i'm standing it upright to print now, and it should work no problem. It's almost done, i printed 2 different halves by mistake, so i'm fixing it now. I'll be uploading the pic tonight of it finished.
Discussions — Mario Kart Switch Stand - For Classic, OLED & Switch2
All in all it is a such nice print! :) Good idea with the Peach version! :)
Hello,
are the individual STL files also available?
I can currently only find the exported 3MF files, except for one STL (Red_Chassis1.stl). Thanks in advance.
See you then Sven Carstensen
Hi I checked it again - I forget to put the STL files into the zip file - I will upload it immediatly - sorry for that!
Yes ofc - research on the zip file - you will find everything you need :)
My zip file doesn’t have the classic model. Am I doing something wrong?
Hi buddy, The Switch Classic should actually fit in the OLED version as well.
Could you please upload a image to how you print the kart base? I am not sure if I am putting in the correct position
same as the g_code file is including :)
Just I wan't to say thank you for your amazing job! You have a great talent and you inspire to people who start designing as a hobby. :3
Thank you buddy - Love your words! :)
Excellent design!! I'd like to know if you used glue to join the pieces or if they fit together perfectly. In my case, the pieces don't fit together. I don't know if it's because of my printer. When will you be able to upload the .stl files?
Thank you so much for your work.
The STL files are available ... You have to glue the pieces fot a better stability :)
Sorry!!! I saw it!! Thanks so much again!!
You re welcome buddy! :)
I just downloaded the file and only the gcodes appear.
I just downloaded the file and only the gcodes appear.
you know i'm gonna go crazy and print a bunch of them in every kart thats relevant. Bowser is a MUST do as well if you can!~
Hi buddy, thank you very much! Bowser and more will come also in different designs :)
Ok so I’m printing the second part. But for me I have to use supports for the base. I don’t know how it’s how to print without them. I have a k1 speedy. So maybe it’s different?
You just need to put the flat side of the model straight on the print bad in your slicer... thats all...
no the issue I was coming across is that by default it puts it on its side when i load it in. So sideways it has to have supports, I didnt see until i printed the first part out and rotated the second half, where the flat part was. So i'm standing it upright to print now, and it should work no problem. It's almost done, i printed 2 different halves by mistake, so i'm fixing it now. I'll be uploading the pic tonight of it finished.
but also how the HELL is the base no supports? what kind of voodoo magic printer do you have?
Hi I checked it again - I forget to put the STL files into the zip file - I will upload it immediatly - sorry for that!
Buen día, disculpa ¿Dónde están los stl? Imprimo los modelos en diferentes impresoras. Gracias de antemano.
Hi I checked it again - I forget to put the STL files into the zip file - I will upload it immediatly - sorry for that!
I designed it in the way that you can print it as well without supports! :)
Gracias!!! Eres el mejor!!
Thank you buddy! :)