-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------

_Thank you for visiting my page! If you can, please consider supporting my art with a [subscription](https://than.gs/u/1514642?plans=true). Members will unlock ALL of my designs as well as the commercial rights to sell physical prints for as long as they are members._


-------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------


Hello everyone, I'm sharing my latest project with you. The model is entirely 3D printed; no external parts or glue are needed. It was created using Rhino and printed with Bambulab X1C using Sunlu Matte PLA. 

**!!!!!!!DO NOT CHANGE THE ORIENTATION OF THE PARTS!!!!!!**



Assembly: https://youtu.be/az79Nx4kNBw?si=_CXAMDNvF-JUS-U9 

[GIF PRESENTATION MODEL](https://files.cults3d.com/uploaders/15095432/illustration-file/3337cd53-0bd3-4948-a64b-419687de36c6/ezgif.com-optimize.gif)


Victorian Two Barrel Gun- Functioning Mechanism - Fully 3D printable

Body.stl

Bullet_type_1.stl

Bullet_type_2.stl

Bullet_type_3.stl

This is the exact same planter as the Grid, just without the texture so it prints much faster. I really like the simplicity of this one and have put up a bunch of these around my house. It's a pretty neutral design that could blend in to almost any aesthetic.

**Supports**
The only version of this that I've been using supports on is Wall Simple Cup Pot 4.5. All other versions do not need supports.

For Wall Simple Cup Pot 4.5, I use supports under the sliding dovetail on the pot.

The slicer is going to want to add supports underneath the pot as well, which is unnecessary, so I added a support blocker to the whole pot and a support enforcer under the dovetail.

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.

**Orientation**
The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.

**Print Settings**
.2mm layer height
15% grid infill. I've been using gyroid for the 4.5" command mount and it's much cleaner.
2 walls

**Filament & Hardware**
Filament I used for this print: HATCHBOX Magic Stone PLA
Hardware: #10-12 x 1-1/4 in screws

Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/ 

Simple Cup Planter

Wall Simple Cup Pot 2.75.stl

Wall Simple Cup Pot 4.5.stl

Simple Planter.3mf

3D Print Files in STL format of the B-01 Tactical Helmet from Helldivers 2

The helmet has a lot of features, they include:
- Default scaled to fit up to 24" circumference heads
- Includes Assembled, Casting, and Solid versions
- Pre-separated into easy to print pieces
- Large parts are pre-cut for smaller printers
- Includes a sizing slice to help you size the helmet before full printing
- A buck to vacuum form the visor is included (we'll offer them in the shop at a later date)
- Bambu Studio Project and GCODE files to get to printing sooner!

If you would like to use these files for commercial use, please subscribe to the "Specialist" tier of my Patreon here: https://patreon.com/galacticarmory

Helldivers 2 Helmet - B-01 Tactical - 3D Print Files

Helldivers 2 Helmet - Assembled Version.stl