The Wavy Mushroom Lamp is inspired by the mushroom form. It features a wavy lampshade, creating a cozy ambience in any space. The base comes in two parts and are connected by 3 m3 screws. An additional m3 screw can be used to tighten the bulb holder if it is too loose. The lampshade can be printed in transparent PETG or PLA to give a cozy opaque effect. (Or opt for standard white PLA or PETG for a more diffused glow.

Instructions

• 3MF file and individual STLs are included
• Use a lower layer height such as .12mm for a higher quality finish and print (Optional)
• The bulb holder holds an E27 Socket with a 370mm diameter

Lamp Base

• Requires Supports (Very Minimal)

Lamp Shade

• Print with 0.6mm line width (Standard = 0.42mm) for a more rigid shade
• Print with 0% infill
• Disable "Ensure Vertical Shell Thickness"
• Disable "Slow Down for Overhangs"

Filament

• Kexcelled Matte White PLA (Lamp Base)
• ESUN White PLA+ (Lamp Shade)

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/xunodesign

Need help? Drop me a message here or DM me on Instagram! Check out my reel on Instagram or Tiktok to see how I made this!