The Puffer Lamp, a cozy lamp inspired inflated and puffy forms to create a soft and ambient light for any space. The lamp base is printed as two parts, the base and the bulb holder. An m3 screw can be used to tighten the bulb holder if it is too loose. The lampshade can be printed in transparent PETG or PLA to give a cozy opaque effect. (Or opt for standard white PLA or PETG for a more diffused glow.

Instructions

• 3MF file and individual STLs are included
• Use a lower layer height such as .12mm for a higher quality finish and print (Optional)
• The bulb holder holds an E27 Socket with a 370mm diameter

Lamp Base

• Requires Supports (Very Minimal)

Lamp Shade

• Print with 0.6mm line width (Standard = 0.42mm) for a more rigid shade
• Print with 0% infill
• Disable "Ensure Vertical Shell Thickness"
• Disable "Slow Down for Overhangs"

Filament

• Kexcelled Matte White PLA (Lamp Base)
• ESUN Transparent PETG (Lamp Shade)

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/xunodesign

Need help? Drop me a message here or DM me on Instagram! Check out my reel on Instagram or Tiktok to see how I made this!