Studio Loup9.7K followers

Follow

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case 3d model

Slide Pen Case

946 downloads · 11 months ago · **Slide Pen Case** Pen case with a sliding lid that locks securely when closed. Includes three inter

This model is restricted by licensing terms.

View license.

Slide Pen Case Pen case with a sliding lid that locks securely when closed. Includes three interchangeable inserts to suit different storage needs.

Print Settings All components print without support 15% infill 0.2 Layer Height (Lowering the layer height may increase the surface quality)

Tags:

Community Makes (3)

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

Community Makes (3)

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

These print great. It would be nice if they were stackable.

Discussions

isuzudave11 months ago

These print great. It would be nice if they were stackable.

These print great. It would be nice if they were stackable. 3d model

PrinterBambu Lab P1S

MaterialPLA

Layer height0.2 mm

Infill density15 %

SupportsNone

raptor_48 months ago

What speed did you print these? The ridges on my two attempts look horrible. Yours look pretty good.

raptor_48 months ago

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed?

I've printed this twice now and both times the ridges are out of alignment. Is this a setting problem or a printer problem? I also needed to scale down the inserts to 99.5% to get them to fit snugly without getting stuck. If I slow the print speed down will that help? What is the recommended print speed? 3d model

MaterialPLA

Layer height0.16 mm

Infill density15 %

SupportsNone

BrimNo

srubaye9 months ago

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

srubaye9 months ago

It is small for Staedtler pencils. When I scaled it to 115% it has a defect

It is small for Staedtler pencils. When I scaled it to 115% it has a defect
3d model

PrinterBambu Lab P1S

isuzudave11 months ago

Any chance of getting a modified lid to make these stackable?

Studio Loup11 months ago

Hi, thanks for the feedback! Yep I could make a modified version that can be stacked. I'll work on it this week.

Slide Pen Case

946 downloads · 11 months ago in

Storage Solutions

and

Studio Loup9.7K followers

Follow

This model is restricted by licensing terms.

View license.

More models

Sektor 7 Studios

CASE WITH INLETS (PRINT IN PLACE) / PENCIL CASE / NO SUPPORTS / FLEXI / ORGANIZER / HOMEDECOR / DESK 3d model

CASE WITH INLETS (PRINT IN PLACE) / PENCIL CASE / NO SUPPORTS / FLEXI / ORGANIZER / HOMEDECOR / DESK

GEN2 PlateStack Case – Prusa – 240-3W-1H 3d model

GEN2 PlateStack Case – Prusa – 240-3W-1H

Minimalist Modern Pen Holder, Minimal Desk Organizer, Pencil Cup | Vase mode 3d model

Minimalist Modern Pen Holder, Minimal Desk Organizer, Pencil Cup | Vase mode

GEN2 Tilt Drawer Pro - 115 3d model

GEN2 Tilt Drawer Pro - 115

Modular Markers Organizer - Customizable 3D-Printed Pen Holder and Desk Organizer 3d model

Modular Markers Organizer - Customizable 3D-Printed Pen Holder and Desk Organizer

Pencil Casket – Coffin-Shaped Pencil Case; Candy Container, Trick or Treat 3d model

Pencil Casket – Coffin-Shaped Pencil Case; Candy Container, Trick or Treat

Bomb Popsicle, Rocket Popsicle, Pop, Ice Cream, Summer, Time, Truck 3d model

Bomb Popsicle, Rocket Popsicle, Pop, Ice Cream, Summer, Time, Truck

IKEA SKADIS Sliding Shelf with Organizer (Small) 3d model

IKEA SKADIS Sliding Shelf with Organizer (Small)

Block Pen Saber – Double Blade Edition 3d model

Block Pen Saber – Double Blade Edition

V8 AIRPODS MAX SLIDE-ON ACCESSORY 3d model

V8 AIRPODS MAX SLIDE-ON ACCESSORY

Modern Desk Organizer – Modular Drawer System (STL) 3d model

Modern Desk Organizer – Modular Drawer System (STL)

RETRO GameStack - PS5/PS4/PS3/Blu-ray 3d model

RETRO GameStack - PS5/PS4/PS3/Blu-ray

IKEA SKADIS Sliding Shelf with Organizer (Large) 3d model

IKEA SKADIS Sliding Shelf with Organizer (Large)

FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE 3d model

FLEXI OTTER - POSEABLE - FUN ANIMAL - ARTICULATED - PRINT IN PLACE

Utility Knife - Wall Holders 3d model

Utility Knife - Wall Holders

White-tailed Deer Skull - Multi-Part 3d model

White-tailed Deer Skull - Multi-Part

Dastardly Dovetail Box (Large) 3d model

Dastardly Dovetail Box (Large)

Hex Bits - Wall Holders 3d model

Hex Bits - Wall Holders

Pencil Fidget Toy 3d model

Pencil Fidget Toy

AIRPODS MAX SLIDE-ON ACCESSORY (TRIBAL HEART) 3d model

AIRPODS MAX SLIDE-ON ACCESSORY (TRIBAL HEART)