Wild and untamed, this sun catcher features a fierce wolf with a sharp, expressive gaze and a hint of attitude. With its bold lines and strong presence, this design captures the spirit of the wilderness and the independence of the wolf.

As sunlight reflects off the disc, it creates a shifting shimmer of color and light, adding depth and movement that brings this powerful design to life.

If you are interested in downloading and 3d printing this sun catcher or obtaining the rights to sell commercially, please join our Patreon or Tribes!

For best results, we suggest the following settings: Initial layer speed: 25 mm/s Initial layer infill speed: 50 mm/s 1 Wall initial layer (recommended) Walls: 2 walls are sufficient Infill: 10% Plates: Clean, washed rainbow build plates are recommended (Textured plates work well too — etched plates add extra sparkle to the finished piece) For outdoors or hot climates I recommend using PETG.

What You’ll Need To assemble your sun catcher, you’ll need: Glue: Standard super glue or E6000 2 CDs or DVDs (repurposed or new - Or our Printable Disc) Charms to hang from the sun catcher (Crystals are recommended for maximum light-catching) String or chain for hanging

Assembly Notes CDs/DVDs are placed inside the print with the bottom of the CD/DVD facing outwards. Glue the rim along the inside of the print to secure them together. Make sure all surfaces are clean and dry before gluing. Allow glue to fully cure before hanging. Add your string/chain and charms.

Printable Disc and SVG cut file to use instead of a CD/DVD: https://thangs.com/designer/Noodle%20Pop%203D/3d-model/Sun%20Catcher%20Disc%20%26%20Vinyl%20Insert%20SVG-1508721