Big Bubbles Planter
This is how I originally designed the Poppy, and I'm bringing it back! It uses the same mounts as all my other wall mounted planters.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill. I've been using gyroid for the 4.5" command mount and it's much cleaner. 2 walls
Filament & Hardware Filament I used for this print: Polymaker Matte Marble PLA Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/
Big Bubbles Planter
Bubble Planter with Drainage
Bubble Planter
Big Bobble Planter
.png&w=3840&q=75)
Bubble Screw Planter
BUBBLE VASE
Bubble Vase – Modern Playful Home Decor
Bubble Octopus Vase – Modern Sculptural Flower Vase
Fancy Table - Mid Century Inspired
Bubbly Plant Pot | 2 Sizes | For Succulents and Other Small Plants
Bubble Sphere Vase – Futuristic Modern Home Decor
Organic Modern Bubble Vase - Minimalist Multi-Stem Ikebana Flower Pot
Extra Large Hand, Chair, Soap Dish, Planter, Succulents
Blue Koi Lotus Pitcher Vase
Ghost Pot & Vase – Halloween Planter & Spooky Decor
Venus de Milo Vase - Famous Statue Flower Pot
CORE VASE 03
CORE VASE 01
Smiley Robot Vase - Cute Desk Decor
Gothic Wall Holy Water Font
What's the difference between 2,75 and 4,5. Missing such information in more your models to explain what is what. I assume diameter in inch but would be nice and not a lot of work of you to add such information.
Inner pot diameter in inches, so size of recess rather than size of overall planter
Why do I get this weird seam outside?
That's due to your slicer seam settings and your printer performance. Try orienting your model with the Dovetail at the back and set your seam to be at the back, it won't disappear but will be hidden
Hi can i use photo this product for my e-shop ? ( i bougt membership) thx. Btw your work is wonderful.
why is the single command strip mount like the one in the photos not included in the .zip? i dont want the round one
I'm not sure if it's one of my settings in my slicer (Bambu Studio) but the twist off trays for the 2.75" pot seem REALLY tight. I printed 4 in matte black, and once I lock them in, it takes all my strength to unlock them and I have to pry it off afterwards 😅 Any help would be appreciated. This hasn't occurred with any of your other planter pots for me, either.