DRAPED ELEGANCE | Table Lamp
DRAPED ELEGANCE | Table Lamp
Want to buy a physical 3D print of this product? Head to Trajann online store.
Enhance your space with our captivating table lamp shade that mirrors the natural charm of a draped fabric. This shade bathes your surroundings in gentle, warm light, creating an inviting atmosphere that effortlessly combines elegance with an organic touch.
It rests on a sleek tripod, designed for either E14 or E26 & E27 bulb sockets.
It also comes in wall light version at the link here.
You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK E14 cord: https://amzn.to/3TchBqs
For the US: E26/E27 cord: https://amzn.to/3U0Xyvy
There are 2 versions of the lamp:
- the original one
- and a smaller version that can fit on PRUSA printers with 210 x 120 x 220mm printing volume.
Also, each shade comes in 2 versions:
- a smooth surface version (the original)
- and a textured version with little bumps all over to make it look more like paper/fabric, which helps hiding little printing defects.
SHADE (Large) | Ø 230 x H 225 mm | Printing: 2h ~ 3h (vase mode) SHADE (For Prusa) | Ø 208 x H 218 mm | Printing: 2h ~ 3h (vase mode)
E14 BASE (Large) | W 200mm x L 175mm x H 107 mm | Printing: 2h ~ 3h E14 BASE (for Prusa) | W 180mm x L 157mm x H 107 mm | Printing: 2h ~ 3h
E26/E27 BASE (Large) | W 200mm x L 175mm x H 107 mm | Printing: 2h ~ 3h E26/E27 BASE (for Prusa) | W 180mm x L 157mm x H 107 mm | Printing: 2h ~ 3h
3D PRINT SETTINGS
SHADE: The shade must be printed with bottom and top faces "open". You can either use the "spiralize" function to print in "vase mode" with 1 wall perimeter only (fine for the smooth shade version). If you want 2 lines in your walls (recommended for the textured shade), do not activate "spiralize", but instead use the following settings: Resolution: 0.2 to 0.3mm / layer or less Wall Line Count: 2 Infill: None Top layers: 0 (to get rid of the top face) Bottom layers: 0 (to get rid of the bottom face) Build adhesion type: 6 to 8mm brim Supports: None
BASE: The base must be printed upside-down, so with the feet pointing up, and the round opening for the E14 socket on the printing bed. Resolution: 0.2 to 0.3mm / layer or less Wall Line Count: 2 Infill: 15 to 20% gyroid Build adhesion type: 6 to 8mm brim Supports: None
DRAPED ELEGANCE | Table Lamp
SAKURA | Scalable Pencil Holder
SYZYGY | Heart Vase, scalable
ARYZ Plus | Pendant light E26/27
CARLA | Table Lamp E14 & E26/27
CAPA | Corner Soap Dish
MINKY | Desktop bin
GRANO | Desktop bin
CALIZ | Woven Table Lamp E14 & E26/27
ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place
MALLA MINI | Woven Table Lamp E14/26/27
MALLA | Woven Pendant light E26/27
FREYA | Standing Planter Pot
DOLCE | Indoor Planter Pot
NEST | Wicker Tissue Box
DELTA RIDGE | Table lamp E14 & E27 fast-print
KYOTO | Self-Watering Planter
MANDO | paper towel roll holder
SAN | Pendant Light E27 & E26 fast print
KETE | Pendant Light E27 & E26 fast print
Just checked. All files are “corrupt” EXCEPT one file labeled “Draped-Elegance_Shade_V2”
Alright, Just uploaded all new versions of the files that are now at the right scale. I checked in various slicers (Cura, Bambu Studio, Orca slicer) and it seems to be fine on all of them.
They work!! Thx 💪🏽
You should really make these fit E25/26 light bulbs as they are more common in the US, i wanna make it this week! but its so hard finding e14 light bulbs that are RGB.
Hi! E26 version of this lamp is now available in the downloads. Let me know how it goes!
Messaged you on IG. The files show up with inaccurate measurements? theyre teenie tiny lol :/
Alright! Will do!
Hello. I can confirm that the E26 base still loads at the wrong size in Bambu Studio. Can I just scale to 200 X 175 X 107?
Hi, Just uploaded all new versions of the files that are now at the right scale. I checked in various slicers (Cura, Bambu Studio, Orca slicer) and it seems to be fine on all of them.