3ddesignbros3.6K followers

Note Card Square - MagSquares

85 downloads · 2 years ago · The 1x2 Note Card square is for those of us that still reach for a pen and paper when needing to kee

Description

The 1x2 Note Card square is for those of us that still reach for a pen and paper when needing to keep track of quick notes or todo tasks through out the day. I often find myself trying to use the digital tools to keep track of tasks but ultimately I always find myself back with the pen and paper.

In order for it to work within the MagSquares system you are limited to a note card size of 3"x5". I'll link to the cards I purchased below.

It prints just like all the other MagSquares with a pause at layer 54 (if printing at .2 layer height) to insert the magnets.

My Print Settings: Layer Height: 0.2mm Infill: 15% Adaptive Cubic Supports: None

Make sure to check out the MagSquares Collection to see a full list of MagSquares currently available.

Supplies: Note Cards Magnets Felt

Tags:

Discussions

edwardguerra.oh2 years ago

I'm excited about this print, but I seem to get continuous failure on the ToDo Template in particular. I've tried a variety of PLA, such as PLA and Matte, and it keeps stringing. Are there additional settings I should consider? I'm printing off a Bambu Lab X1 Carbon with a Textured PEI Plate.

3ddesignbros2 years ago

There is a lip on the underside of the template so it wraps over the note card. Make sure you are printing it upside down otherwise you'll be trying to bridge alot.