SAREM is an articulated Fairy Fish. It is printed in place and doesn’t require supports. If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write m

For personal use only

All my files are protected by Copyright, should NEVER be shared or resold.

To legally sell physical print of my design and if you want to get the latest Models and exclusive designs for your support visit:

www.patreon.com/bottega3d

If you have adhesion difficulties while printing, I recommend using raft or brim. Good calibration and retraction is necessary for a great result.

If you print it, I would love to see it and get your feedback, it is important to me; and if you have any doubts or problems on any printing steps, please write me.

NOZZLE DIAMETER: 0,4 mm. LAYER: 0.15 or 0.16 OUTER WALLS: 3 INFILL: 10% SUPPORTS: NO