Here we have the latest season of Fortnite Sprites, the Superman and Dash variants! These mini heroes are small in size but big on attitude - or print them massive like the superman at 150mm tall!

I have designed these to be printed as quickly as possible with individual parts to help out the sellers out there. Quicker prints=more prints=quicker turnaround=more money in your pocket.

All pieces are separated to parts, do not paint them with the paint tool. Go to your objects tab and change the colours of the pieces of that part if you wish to.

As stated, I have printed them up to 150mm and tolerances are still great for all parts fitment.

Print them. Pose them. Start your squad.

I have uploaded the Dash sprite at 150mm with a separate mouth piece to attach in post processing. This will work fine given the size of each piece. I do not recommend you printing the mouth and body in a smaller scale due to the size. This was done due with Dash due to colour bleeding black to orange showing more obvious than the superman black to blue. If you still wish to print them as one piece, my recommended print settings are as follows: -Increase flush volume for 'Black to Orange' to its max (800) -Add a primitive shape, I frequently use cylinder -Change object settings for the primitive shape as follows: -1 wall, 5% infill -Tick all 3 flush options in the multimaterial tab -Change height of the primitive flush object to the layer height where black is no longer used (Dash @ 150mm tall, 99mm high and above there is no black), then change the amount top layers for how many layers that black is used (again for Dash @ 150mm tall, it is 50 layers)

I hope this makes sense - if it doesn't and I have lost you, let me know and ill make a video on it! :)