Sailor Moon in neon lights - Set of bookmarks
2nd set tonight
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3 #f5547c PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 #56b7e6 PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Hot Pink (10204) At layer #16 (1.36mm) swap to Sky Blue (11603) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.
























