- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

HALLOWEEN FIDGET TOY

Hello everyone :)

We created a little fidget toy. Halloween is just around the corner, so we thought we'd create a simple fidget toy. The fidget toy can be printed "print in place" and is easy to print. It also uses relatively little filament. We hope you like it.

The fidget toy is a lot of fun to use and it also calms me down a little. Probably also perfect for your children.

No supports are required for this print.

YOU CAN SCALE THIS MODEL IN ANY SIZE YOU WANT!

Have fun printing!

RECOMMENDED PRINT SETTINGS:

• Filament: Overture PLA Matte (used in our make)
• Infill: 10% Gyroid or Grid
• Layer Height: 0.2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: none needed
• Brim: None needed, but when you have adhesion problems than activate the brim

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios