This part has a Clip which connects to a Clip Hole. The opposite side has a small thread that fits into small thread holes.

This listing has two orientations of Clips: Vertical and Horizontal. The arrow on the back of the thread should point upwards. (If you have very old Tiles, Vertical becomes Horizontal, and viceversa)

To screw this part fully in, you may need a tool like pliers or the Clip Tool.

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts to create the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io