Baby Sea Serpent Keychain

A keychain version of the Baby Sea Serpent!

Print-in-place fidget keychain that doesn't require any supports to print!

*This design contains pointed edges when printed, handle with care*

Flexible Bear TPU

TPU bear 5.stl

Turkey Fan Toy | Print-In-Place

Fan.stl

Puzzle Pack 2 Multi-Pack

Bases and Caps - Circle Puzzle 5X.3mf

Hen Of the Woods Mushroom Dragon

HenOftheWoodsMushroomDragonDD.stl

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Looks like the cat's out of the bag.  When you're feeling frisky or need a quick paws from the hassles of everyday life, reach for your purr-fect pocket pal.  

Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Loose Tolerance Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Short Bony Basilisk: **
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk: **
https://than.gs/m/937047

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

**Tight Tolerance Long Bony Basilisk: **
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk: **
Coming Soon
**Loose Tolerance Long Bony Basilisk: **
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Caterpillar Fidget by TealCat Creative

TealCat Creative Caterpillar.stl

Anti Stress Fidget Axis Gyroscope Spinner Print in Place

Fidget_Axis_Spinner_Gap0,35.STL

Cassette Tape - Fidget / Print in Place

cassette_tape_fidget.stl

Ghost Gyro Fidget H

Capybara Fidget Keychain

Capy_layers_keychain.stl

Panda Fidget

BOBpandaFidget.stl

Lumi

Lumi.3mf

Articulated Cute Spider ( No Supports )

Cute Spider ( Articulated ) by BODY3D.stl

Milk Carton Buddy Articulated

MilkCartonBuddy(OnePrint).stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Skele-Spine_v2_Loose.stl

Ghost Gyro Fidget A

Ghost that rotates with two different faces

Mini Dragon Flexi

dragonmini.3mf

Flexi Batman Arkham City 🦇

This 3D printable model is a Flexi Batman Arkham City / Asylum that has a flexible base of the Batman logo and the letters Batman on top. It’s a cool and fun accessory that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the Arkham games.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is designed to print in two colors for the base and the letters. It has a stunning and striking design that matches the logo of Batman Arkham City / Asylum, the acclaimed video games that feature Batman’s adventures in Gotham’s most notorious prison and city district. This Flexi Batman Arkham City / Asylum 3D Printable Model is a great way to show your appreciation for the Dark Knight and his cinematic games. Download it today and be the hero Gotham deserves!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Digital Store
Fidget

Most Popular this Year

Categories

Popular

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Baby Sea Serpent Keychain

Flexible Bear TPU

Turkey Fan Toy | Print-In-Place

Puzzle Pack 2 Multi-Pack

Hen Of the Woods Mushroom Dragon

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Caterpillar Fidget by TealCat Creative

Anti Stress Fidget Axis Gyroscope Spinner Print in Place

Cassette Tape - Fidget / Print in Place

Ghost Gyro Fidget H

Capybara Fidget Keychain

Panda Fidget

Lumi

Articulated Cute Spider ( No Supports )

Milk Carton Buddy Articulated

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Ghost Gyro Fidget A

Mini Dragon Flexi

Flexi Batman Arkham City 🦇

Digital StoreFidget

Most Popular this Year

Categories

Popular

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Baby Sea Serpent Keychain

Flexible Bear TPU

Turkey Fan Toy | Print-In-Place

Puzzle Pack 2 Multi-Pack

Hen Of the Woods Mushroom Dragon

Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Caterpillar Fidget by TealCat Creative

Anti Stress Fidget Axis Gyroscope Spinner Print in Place

Cassette Tape - Fidget / Print in Place

Ghost Gyro Fidget H

Capybara Fidget Keychain

Panda Fidget

Lumi

Articulated Cute Spider ( No Supports )

Milk Carton Buddy Articulated

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Ghost Gyro Fidget A

Mini Dragon Flexi

Flexi Batman Arkham City 🦇

Digital Store
Fidget