Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Skele-Spine_v2_Tight.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Skele-Spine_v2_Loose.stl

Reaper Cloak

Don't fear... Accessorize! 

While this ghostly garb might have others trembling in terror, your old bones can stride with spooky style in this long flowing fabric of fright.

Use this Reaper Cloak as decoration on its own or pair with the Skele-Spine Snap-Flex Articulated Fidget Toy for the ultimate spectral ensemble!

This Reaper Cloak is an accessory for the Skele-Spine (the fifth creation in a series of Snap-Flex models by Mimetics 3D), and it's available for free for a limited time.

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale to fit the Skele-Spine.  Shrinking may also result in thin walls.

Cozy Dragon Shorty

CozyDragonShorty.3mf

Cozy Dragon Tiny

CozyDragonTiny.stl

Cozy Dragon Long

This is the longer version of our cozy dragon!

Cozy Dragon

CozyDragonMedium.3mf

Dragon Head Trophy

Dragon_Head.stl

GLIZZIE DRAGON! HOTDOG ARTICULATING, PRINT IN PLACE DRAGON

Hotdog Dragon.stl

Shakaworld3D Acorn Dragon Full Release v2.stl

Print in place Acorn dragon ready for fall.

Costume Wing Mount - HalloweenWearable

I made this HalloweenWearable to support costume wings! 
It utilized two telescoping poles and can be mounted with sturdy thread. I have it mounted to a posture corrector because I found it provided the best support but the whole setup is extremely light and can be mounted to just about anything that's securely fastened to your body.



Costume Wing Mount 

Dragon Mini Keychain

This is the keychain version of our mini dragon

Dragon Mini

This little dragon has a joint between the head and the body. 

Skele-Spine - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Rising from the depths of the bone yard and the shadows of the catacombs, the Skele-Spine springs to life, ready to thrill and send shivers down your spine! This fidget fiend, shaped like a skull atop an articulated backbone, isn’t just a creepy curio—it’s the ultimate tactile treat for hands that crave a bone-bending twist. Perfect for any eerie ensemble, Skele-Spine yearns to rest on your desk or dangle from your fingertips, catching the wandering eyes of all who pass. While others may be haunted by the memories of goblins and witches, the Skele-Spine insists on making a spine-tingling statement all its own this Halloween season.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Skele-Spine to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Skele-Spine is the fifth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Skele-Spine to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model to be uploaded soon.

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Skele-Spine

Authentic Cuban Chain Print in Place, For Halloween Wearables, HalloweenWearable

This is the ONLY genuine Cuban Print in Place Chain you can get. Nothing else is even close. If you want your Costume to be OFF the CHAIN, you need this around your neck. Show them how cool you are, how far you are willing to go! 

halloweenwearable
halloweenwearables
halloween wearable
#halloweenwearable
#halloweenwearables


Dragon Long

This dragon when stretched out is roughly 22 inches.  
Heavily scaling this dragon down may cause the links in the tail to be weaker. Want a smaller dragon? Check out our other dragons that are available on our profile.

Dragon Midsize

Just the right size dragon with reasonable print time!  

Dragon Shorty

Short and tubby articulating dragon that is a fast and cute print. 

Keychain Witch Hat Snappy Cat  - (Snap-Flex: Medium Tightness Joint)

WHSC_Keychain_Medium_Both.stl

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Medium Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942873

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Digital Store
Dragon

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Reaper Cloak

Cozy Dragon Shorty

Cozy Dragon Tiny

Cozy Dragon Long

Cozy Dragon

Dragon Head Trophy

View 43 new models

Shakaworld3D Acorn Dragon Full Release v2.stl

Costume Wing Mount - HalloweenWearable

Dragon Mini Keychain

Dragon Mini

Skele-Spine - Articulated Snap-Flex Fidget (Tight Joints)

View 91 new models

Dragon Long

Dragon Midsize

Dragon Shorty

Keychain Witch Hat Snappy Cat - (Snap-Flex: Medium Tightness Joint)

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Digital StoreDragon

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Tight Joints)

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Loose Joints)

Reaper Cloak

Cozy Dragon Shorty

Cozy Dragon Tiny

Cozy Dragon Long

Cozy Dragon

Dragon Head Trophy

View 43 new models

Shakaworld3D Acorn Dragon Full Release v2.stl

Costume Wing Mount - HalloweenWearable

Dragon Mini Keychain

Dragon Mini

Skele-Spine - Articulated Snap-Flex Fidget (Tight Joints)

View 91 new models

Dragon Long

Dragon Midsize

Dragon Shorty

Keychain Witch Hat Snappy Cat - (Snap-Flex: Medium Tightness Joint)

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Digital Store
Dragon