Piranha Plant JoyCon Grip | Cartridge Holder 

piranhaGrip.stl

Embrace Vase – Valentine’s 3D-Printable Romantic Design

couple.stl

Reaper Cloak

Don't fear... Accessorize! 

While this ghostly garb might have others trembling in terror, your old bones can stride with spooky style in this long flowing fabric of fright.

Use this Reaper Cloak as decoration on its own or pair with the Skele-Spine Snap-Flex Articulated Fidget Toy for the ultimate spectral ensemble!

This Reaper Cloak is an accessory for the Skele-Spine (the fifth creation in a series of Snap-Flex models by Mimetics 3D), and it's available for free for a limited time.

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale to fit the Skele-Spine.  Shrinking may also result in thin walls.

The forbidden sunflower

The forbidden sunflower.3mf

Storm Dragon

Cinderwing3D_StormDragon_Color.3mf

Spa Time Goose Gear for Porch Goose

PorchGooseCurlersSTL_FunFam3D.stl

Rowlet Phone/Switch Holder - Pokemon

Rowlet Phone Holder-Body.stl

Stars and Stripes Top Hat Gnome

TopHatStarGnome4Colorv4Generic3MFFunFam3D.3mf

 Wiggly Easter Bunny – Articulated & Suportless! 

Wiggly  Easter Bunny P3d .stl

Phoenix bust (Pre-Supported)

phoenix.stl

Smaug Bust

Smaug.3mf

Imperius bust (Pre-Supported

Torso.stl

Helldivers 2 bust (Pre-Supported)

Helldivers_bust.stl

Fancy Flower Gnome

FancyFlowerGnome1Color3MF_FunFam3D.3mf

Rat Keychain

This is the keychain version of our rat that has a joint between the head and body!

Luis, the Flexi Lion - Magnetic Hand-Holding Companion

0_flexiLion_multicolor.3mf

Corn on the Cob Fidget + Garden

Corn Leaves.stl

Stochastic Mushroom Magnets (Small)

Mush Mag Small Curve A.stl

Fold Vase

Fold Vase.stl

The Ervon Planter Pot with Drainage Tray & Stand: Modern and Unique Home Decor for Plants

ERVONPOT.stl

**Hi everyone**! Introducing our newest addition to the **Cute Flexi Pets** collection – the adorable **Flexi Capybara**! Designed for easy **print-in-place** assembly **without supports**. Just like our other designs, this little cutie doesn't need any additional setup – print it and it's ready to go!

pssss, check out the [Diorama 🏠](https://than.gs/m/1354514) for this cute flexi!

**What's included in the 3mf file? 🦜**
- Keychain Version
- Toy Version: **2x** size for extra cuddliness
- Magnet Version: Features two **D8x2mm magnets** for easy after-print assembly

Available versions with capybara with **open eyes** 👀 and **sleeping** 💤 capybara. Also available versions with **apple** 🍎 and **bird** 🦜 above the capybara's head - see 3mf screenshot! The apple and bird are also available separately so you can make other combinations in your Slicer.

Explore the **Cute Flexi Pets Collection**🦊🦜 Our guinea pig is just one of the many adorable animals waiting for you! Visit our Cute Flexi Pets Collection to see them all.

Cute Flexi Capybara (Toy, Keychain & Magnet), Mini Animals 水豚 

FlexI Capibara_BAMBULAB.3mf

**We believe in true love, especially when it's 3d printed ❤️🥑✨**

Avocado Couple  Keychain!
- Available in 4-color and 6-color versions, 3mf already colored.
- You can print them _with_ or _without_ magnets.
- 3MF includes preset pauses, use two _D8x2mm_ magnets to make them attract. 🧲

**Which glue should I use for the magnets?**
You can use any instant glue, such as cyanoacrylate-based glue like "Super Attack". Use very little and then wait 1-2 minutes for it to dry before restarting the print.

**Can I print the keychains without magnets?**
Yes, you can! Just remove the pause from the 3MF file in your slicer, or when the pause happens during printing, simply resume the print right away.

**What filament/colors did you use in 6 color version?**
- Bambulab PLA Basic Brown
- Bambulab PLA Matte Characol (Black)
- Bambulab PLA Matte Ivory White
- Bambulab PLA Basic Bright Green
- Bambulab PLA Basic Bambu Green
- Bambulab PLA Basic Pink

For the Heart, Bambulab PLA Matte Scarlet Red.

**What filament/colors did you use in 4 color version?**
- Bambulab PLA Basic Brown
- Bambulab PLA Matte Characol (Black)
- Bambulab PLA Matte Ivory White
- Bambulab PLA Basic Bright Green

For the Heart, Bambulab PLA Matte Scarlet Red.

**Can I sell physical copies of this model? 💰**
Yes, if you have a commercial license! Check out our subscription plans on Thangs for more details and unlock the opportunity to share this design with your customers.

Avocado Couple Keychain, Romantic San Valentine Gift, Heart

Avocado keychain_BAMBULAB.3mf

Avocado M.stl

**✨ Woobu Upa ✨**

3 walls, 15% gyroid or 3D honeycomb infill. No supports.

The print in place version tested down to 50% I don't recommend going below 70%

for the split to parts version Use 0.12 Layer height for best quality on everything except the body which can be printed with standard 0.2 layer height

Use Concentric pattern for top surface pattern

Split to parts version tested up to 120%, I don't recommend scaling this version down

Please use Brims with a brim gap of 0.3 if you are using Textured PEI plate, especially so if its a multi color plate. A little bit of post printing clean up is better than losing the plate due to adhesion issues.

For the split to parts version tolerance can vary across printers and filaments, Scaling up or down 2% depending on your fit should resolve any assembly issues. If you need to scale the face make sure you are also scaling the rest of the face parts with the same scale.

I've included a fish magnet for the magnet faceplate. The magnets required are 5x3 and I get mine from amazon! 

create a pause on layer 20 when printing the hidden magnet fish version to insert the magnets.** Please don't use this version if you don't have a magnetic build plate, without a magnetic plate the magnet will stick to the nozzle and could result in damages. **

**Editing 3MF**

Avoid using the slicer's fill tool when coloring the eyes, and faceplate in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects.   

Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

⭐**As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision**⭐
+
+
**📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available from my profile page - [Click here](https://thangs.com/designer/Layersingreen?srsltid=AfmBOoo-_xVHCWbHkQXF90e5PVCiusocCbRnGcPXimgvcFGcwYfZNsAb)📌**

Woobu Upa

Woobu_Upa.stl

An upgraded version of the Hylian Shield Nintendo Switch Cartridge Case.  This case is able to carry up to 65 Switch cartridges.  You will need 4 x M4 20mm button cap screws for assembly.  All parts excluding the Shield Body, Bird Head, and Triforce will need supports when printing.  All parts were printed on a Bambu Labs P1S. 

XL Hylian Shield Nintendo Switch Cartridge Case

Shield Body.3mf

Elevate your decor with the Knit-Stitch Vase, a design that marries the warmth of knitted textures with the sleekness of contemporary style. Cast in a rich purple, this vase features an intricately textured surface reminiscent of hand-knit fabric, offering a touch of artisanal sophistication to any setting. A gracefully tied rope belt adds an element of rustic elegance, making it a standout piece. Perfect for displaying a fresh bouquet or a selection of vibrant faux stems, this vase is available for you to bring its unique charm into your home.

 Become a member for access to all of my designs 😁 Continue enjoying this perk for as long as you are subscribed, plus the commercial rights to start selling your creations of my designs immediately

Knitted Roped Vase Planter

Knitted Rope Vase.stl

Knitted Rope Vase Painted.3mf

I recently released my ‘Mega’ Magnetic Tile Haunted House Collection but have been wanting to make a playful, scaled down version - so here it is 👻 This is my ‘Mini’ Magnetic Tile Haunted House that is ¼ the scale of my original. For extra fun, many of the windows have 2-sided window panes that rotate, there's a skeleton that greets you behind a hinged front door, tombstones to decorate the front yard and all the spiders, cats, rats, ghosts and skeletons you can handle 🕷🎃🐈‍⬛🐀👻 (These tiles are compatible with store bought magnetic tiles just fyi:)

****3D Print Settings****
PLA Filament
Layer height 0.2mm (for some of the more detailed pieces - like the rat windows and tombstones you can use a 0.16 layer height if preferred)
Infill 15%
Brim may be needed on larger pieces (like the 150x75 walls) if you notice any warping

****Neodymium magnets needed: 20x5x2 ****

- I specifically designed all these pieces to work with this size magnet

- Here is a link to these magnets on Amazon: ****https://amzn.to/3Nibhd3****

- Magnetic build plate highly recommended but not absolutely necessary.


****Printing Instructions for Inserting Magnets and Filament Pieces:****

- Every piece in this collection (except for the Porch Pillars and the Chimney Cap) need to be paused at layer 30 (layer height 4.8mm) to insert magnets. 
- The Front Door piece and all the window panes that rotate also need cut pieces of filament placed in the ‘filament chamber’ areas (see photos and video). 
- It helps to straighten the filament pieces that will be inserted into these pieces.  I have designed a separate 3D printed device to do that (I call it the ‘filament straightening block’) and will link a video below.

- After the magnets/filament are inserted, resume printing

****I have also included a 3mf print profile with the following print plates:****
Print Plate #1 Mini HH_75X75_Front Door: 4 colors, pause at layer 30, cut and insert filament pieces to fit into filament chamber areas
Print Plate #2 Mini HH_75x75_Curved Cat & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #3 Mini HH_75x75_Curved Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #4 Mini HH_75x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #5 Mini HH_75x75_Rectangle Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #6 Mini HH_75x75_Rectangle Pumpkin & Ghost Window: ****5 colors!!****, pause at layer 30. Cut and insert filament pieces to fit into filament chamber areas.
This is the only piece with 5 colors. You will notice I colorized both the ghost and the pumpkin white.  After the white is done printing the ghost you will need to change out the white filament for orange before it starts printing the pumpkin.  Pause the print if needed to do this (on my Bambu printer I can do this while printing).
Print Plate #7 Mini HH_75x75_Rectangle (Plain) Window: 3 colors, pause at layer 30
Print Plate #8 Mini HH_75x37.5_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #9 Mini HH_75x37.5_Curved Rat Window:3 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #10 Mini HH_75x37.5_Plain Wall Panel: 1 color, pause at layer 30
Print Plate #11 Mini HH_150x75_Curved Skeleton & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #12 Mini HH_150x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #13 Mini HH_150x75_Tree Wall: 2 colors, pause at layer 30
Print Plate #14 Mini HH_75x75_Floor Piece: 1 color, pause at layer 30
Print Plate #15 Mini HH_75x37.5_Floor Piece: 1 color, pause at layer 30
Print Plate #16a Mini HH Front Porch: 1 color, pause at layer 30
Print Plate #16b Mini HH Porch Pillars: 1 color, pause at layer 30
Print Plate #17a Mini HH Tombstone Noah&RIP: 2 colors, pause at layer 30
Print Plate #17b Mini HH Tombstone Ben&Waldo: 2 colors, pause at layer 30
Print Plate #18 Mini HH Front Door Awning: 1 color, pause at layer 30
Print Plate #19 Mini HH_75x85_roof: 1 color, pause at layer 30
Print Plate #20 Mini HH_90x85_roof (no chimney): 1 color, pause at layer 30
Print Plate #21a Mini HH_90x85_roof with chimney: 1 color, pause at layer 30
Print Plate #21b Mini HH Chimney Cap: 1 color, pause at layer 30

Have fun printing!

Mini Magnetic Tile Haunted House Collection

(21a) Mini HH_90x85_roof with chimney.stl

Digital Store
Most Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Piranha Plant JoyCon Grip | Cartridge Holder

Embrace Vase – Valentine’s 3D-Printable Romantic Design

Reaper Cloak

The forbidden sunflower

Storm Dragon

Spa Time Goose Gear for Porch Goose

Rowlet Phone/Switch Holder - Pokemon

Stars and Stripes Top Hat Gnome

Wiggly Easter Bunny – Articulated & Suportless!

Phoenix bust (Pre-Supported)

Smaug Bust

Imperius bust (Pre-Supported

Helldivers 2 bust (Pre-Supported)

Fancy Flower Gnome

Rat Keychain

Luis, the Flexi Lion - Magnetic Hand-Holding Companion

Corn on the Cob Fidget + Garden

Stochastic Mushroom Magnets (Small)

Fold Vase

The Ervon Planter Pot with Drainage Tray & Stand: Modern and Unique Home Decor for Plants

Digital StoreMost Popular

Most Popular of All Time

Categories

Popular

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Paid Models

Trending

Popular

Makes

Videos

New Uploads

Downloads

Clips

Piranha Plant JoyCon Grip | Cartridge Holder

Embrace Vase – Valentine’s 3D-Printable Romantic Design

Reaper Cloak

The forbidden sunflower

Storm Dragon

Spa Time Goose Gear for Porch Goose

Rowlet Phone/Switch Holder - Pokemon

Stars and Stripes Top Hat Gnome

Wiggly Easter Bunny – Articulated & Suportless!

Phoenix bust (Pre-Supported)

Smaug Bust

Imperius bust (Pre-Supported

Helldivers 2 bust (Pre-Supported)

Fancy Flower Gnome

Rat Keychain

Luis, the Flexi Lion - Magnetic Hand-Holding Companion

Corn on the Cob Fidget + Garden

Stochastic Mushroom Magnets (Small)

Fold Vase

The Ervon Planter Pot with Drainage Tray & Stand: Modern and Unique Home Decor for Plants

Digital Store
Most Popular