roborob43 followers

Bambu X1C Vent Adapter

131 downloads · 3 years ago · I wanted to vent the exhaust from my Bambu Labs X1C through a filter then outside. The original mode

This model is restricted by licensing terms.

View license.

Description

I wanted to vent the exhaust from my Bambu Labs X1C through a filter then outside. The original model would not work without modification. The other remixes were close, but not quite what I was looking for.

Print times are roughly 3hr on normal, and 1.5hr on ludicrous.

This model is a remix of: https://www.printables.com/model/280283

Tags:

Discussions

heydillonharrington3 years ago

Perfect for my needs! I added some adhesive foam tape for extra measure as I didn't want to have any whistling noise. M3x10 Screws work with the foam gasket. Probably M3x8 without. Petg was plenty strong for the screws to compress the gasket with zero deflection. I got a cheap inline 4-inch ac vent fan, a 4-inch vent hose, an adjustable fan speed plug, and the insanely cheap sikadeer window a/c vent adaptor, from amazon. I also printed the 4-inch hose to 5.1-inch adaptor available on printables.

roborob2 years ago

I used a 5v Noctua 120mm fan with a 5v adapter (phone charger) at the window. I plugged it into a home automation wall switch so I can turn it on and off from my PC or phone.