Another HueForge - a photo of the Monorail passing through EPCOT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Stone Blue Transmission Distance: 0.5 PLA PolyLite Pro Light Blue Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to Stone Blue At layer #12 (1.04mm) swap to Light Blue At layer #14 (1.2mm) swap to White for the rest.