This design was made with you in mind :)

This rattan soap bottle was designed in collaboration with ProjectPrintLab and MakerLink! It is a fashionable and practical 3D print that is perfect for gifting to others, or using in your own home! The model prints completely without supports and can be printed without an AMS as well!

Commercial MSRP $29.99 Commercial MAP $24.00
Become a member to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original” Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!

Model Assembly Pretty simple for this one — print the rattan section first, then start the bottle plate, the bottle print will pause at the perfect time to slide on the rattan sleeve and then the printer can be resumed, then slap on a cheap pump from Amazon and your ready to roll!

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions

Materials Bambu Lab Matte PLA (Bone White) — https://us.store.bambulab.com/ Bambu Lab Matte PLA (Matte Charcoal) — https://us.store.bambulab.com/ Soap Pumps — https://amazon.com/

Print settings Material — PLA Print orientation — as shown in slicer images on this post! Nozzle size: 0.4 mm Layer Height: 0.2 mm Infill: 15% wall thickness: 3 passes thick Bed Size of my Printer: 256x256mm
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!