IVAN D
kowafatcompany359 followers
Follow
kowafatcompany
kowafatcompany
|
Image 1 of 3
Pypurka 3d model
kowafatcompany
kowafatcompany
|
Image 1 of 3
Pypurka 3d model
Pypurka 3d model
Pypurka 3d model
Pypurka 3d model

Pypurka

Purchase model for $6.90 USD
This model is restricted by licensing terms. 

Add color and style to any space. When you touch and hold this vase, it's sure to bring you joy! You can use it as a vase, pot, or decoration, or give them as a gift to someone special.

Size There are three sizes of this model. -S (small): h - 100 mm, inner diameter 80 mm -M (medium): h - 150 mm, inner diameter 115 mm -L (large): h - 200 mm, inner diameter 150 mm

Prints settings

  • Nozzle: 1 mm or 0.8 mm
  • Turn ON the "Vase Mode"
  • Layer height: 0,32 mm
  • Bottom layers: 4
  • Build plate adhesion type: none
  • Support: none

Note These models don't have drainage holes and are porous, meaning they don't retain water. If you want to put fresh flowers in the vase, I suggest placing a small glass cup or jar inside. Otherwise, dried flowers are a great match! For private, non-commercial use only!

Community Makes (1)
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting 
small stand made for this for my fire place hearth,
looks perfect with some retro styling
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting 
small stand made for this for my fire place hearth,
looks perfect with some retro styling


Community Makes (1)
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting 
small stand made for this for my fire place hearth,
looks perfect with some retro styling
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting 
small stand made for this for my fire place hearth,
looks perfect with some retro styling

Discussions
Luke R
luker250294
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting small stand made for this for my fire place hearth, looks perfect with some retro styling
Printer in white PLA and added a 28.5mm hole in the centre of the base to allow an E14 , B22 light fitting 
small stand made for this for my fire place hearth,
looks perfect with some retro styling 3d model
 3d model
PrinterAnycubic i3 Mega
Print bed sizeX: 220 mm; Y: 220 mm; Z: 205 mm
MaterialPLA
Layer height0.28 mm
SupportsNone

Pypurka

24 downloads · 2 years ago in  and 
IVAN D
kowafatcompany359 followers
Follow
Purchase model for $6.90 USD
This model is restricted by licensing terms.