Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Azure Blue Transmission Distance: 3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Charcoal Black At layer #4 (0.54mm) swap to Azure Blue At layer #6 (0.7mm) swap to Lava Red At layer #8 (0.86mm) swap to Savannah Yellow At layer #11 (1.1mm) swap to White for the rest.

The model is not as tall as your last slider. Consider checking the Full Range button or change your Depth Mode.