Bring a touch of Zen to your garden with this Bird Feeder Temple. Designed with both aesthetics and functionality in mind, this model features a multi-part interlocking system that requires no AMS to achieve a beautiful multi-color look.

Key Features

• True Multi-Color (No AMS): Designed as separate parts so you can print each component in your color of choice and snap them together.
• Functional Design: Includes a wide landing perch for birds and a high-capacity internal reservoir for seeds/pellets.
• PETG Optimized: While it can be printed in PLA, I highly recommend PETG for outdoor durability against UV rays and weather.

Print Settings Recommendations

• Material: PETG (highly recommended for outdoor use).
• Layer Height: 0.2mm for a good balance of speed and detail. And 0.16 for the top Roof
• Infill: 15% (Gyroid recommended for strength).
• Walls: 3 perimeters to ensure the thin railings and pillars are sturdy.
• Supports: Yes, supports are required for all parts to ensure clean overhangs and precise fitment.  

Assembly Instructions

• Main Structure: Place the House body onto the Base and secure it by inserting the clips into the designated holes.
• Roof & Pillars: Place the Top (Roof) onto the house. Align the 4 Pillars and slide them through the roof holes to lock the upper structure to the base.

Decorations: 

• Insert the Lanterns into the holes at each corner of the roof.
• Press-fit the Dragons into the roof ridges (if the fit is loose, a tiny drop of glue can be used on the tail, but it is designed to stay via friction).
• Safety Railing: Snap the Barriers into the slots around the base perimeter.

Hanging: Thread a durable cord or rope through the top loop to hang your temple from a sturdy tree branch.