There is a ton of wiggle and shake in this model - the legs alone each have three joints and the little feet are just adorable. It is super fun to fidget with and of-course pose!

Popping in the wings: The joints are tight by design so that the wings stay in a nice pose positions but will definitely take some good leverage to get them in. I like to do the front wings first and then the back. If you do one side (like the left / right side) then you lose a lot of your grip area.

**Downloaded file is not available for commercial use and is protected by copyright law. If you wish to sell my models commercially you must maintain a commercial license through our Patreon

https://www.patreon.com/colorcloud3d

Print Settings:

Coloring: 🎨The model is colored mostly by parts (except the eyes and the wings) so if you decide to change the colors around in the slicer, please do so from the quick select colors settings or the color by object option in the inspector window.

NOTE: Don't go around with the paint bucket as you will lose the print quality from the 3mf.

Print Settings: 🖨️ Print Tested down to 50% and the joints still feel strong and the model articulation is maintained. I personally like the 70% size, which is the size shown in the pictures.

3 Walls and 15% Gyroid infill (the 3mf includes these settings) 0.2 layer height